Jump to content

Guest, which answer was the most helpful?

If any of these replies answered your question, please take a moment to click the 'Mark as solution' button on the post with the best answer.
Marking posts as the solution will help other community members find answers to their questions quickly. Thank you for your help!

Featured Replies

Posted

Hope you can help me, i had a second hard drive (e) installed into my

computer, it has been there for about six months, now all of a sudden the

computer can not locate it. Is there anyway i can get it located it, if not,

is there a way for me to get back all my pictures from it? Thank you a head

of time.

tigerclaws wrote:

> Hope you can help me, i had a second hard drive (e) installed into my

> computer, it has been there for about six months, now all of a sudden the

> computer can not locate it. Is there anyway i can get it located it, if not,

> is there a way for me to get back all my pictures from it? Thank you a head

> of time.

 

Is the hard drive seen in the BIOS (before Windows loads)? Here are some

troubleshooting steps to get you started:

 

1. With the computer unplugged, open the case and reseat the cable going

from the motherboard to the hard drive. Reseat both ends of this cable.

Also reseat the power connector going to the drive. Restart the computer

(without closing up the case). Is the drive seen in the BIOS now?

 

2. If the drive is still not seen in the BIOS, swap out the cable for a

known-working one.

 

3. If swapping out the cable doesn't work, pull the drive and slave in

another computer. Can it be seen in that computer's BIOS? If not, the

drive has failed and the only way to get data off it is to send it to a

professional data recovery service such as Drive Savers. This can be

quite expensive, normally starting at around $500 USD and going up from

there. Only you can determine the value of your data.

 

4. Going back to Step 1 above, if the hard drive *is* seen in the BIOS

but not in Windows, I would boot with a rescue system such as Knoppix or

a Bart's PE and pull off the data before doing anything else. Copy to an

external drive or burn to CD/DVD-R from within the rescue system.

 

Standard caveat: Testing hardware failures often involves swapping out

suspected parts with known-good parts. If you can't do the testing

yourself and/or are uncomfortable opening your computer, take the

machine to a professional computer repair shop (not your local

equivalent of BigStoreUSA). Have all your data backed up before you take

the machine into a shop.

 

When this is all over, create a backup strategy and stick to it because

with computers, Stuff Will Always Happen.

 

 

Malke

--

Elephant Boy Computers

http://www.elephantboycomputers.com

"Don't Panic!"

MS-MVP Windows - Shell/User

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...