May I change motherboard´s if so even hotplug it with windows installed on a

STRIPE/0 or do I have to buy a new OEM Windows program and toss both

motherboad and OS.I read the OEM manual and came to up and downgrading

and swapped instead,I rather ask here at the newsgroup I get even tired

reading the OEM manual it´s so restricted.

I finally burned the bridge under the Grafic card.The wires to the cooler on

the grafic card,had burned to a metallic plate on it and shorten the wires,so

that it

had stopped it´s rotation,meanwhile I accidently forgot to attach the front

12mm

intake and a rear outblowing cooler had stopped in the heat,and there must

have

become so hot that the bridge down under have died because when I laid a hand

It were much to hot,I found the incident by BSOD´s 2 minuttes after turning

on the

computer.I have hotplugged the windows on a raid on another motherboard(same

Case and hardware except the motherboard off curse witch

succeded after first montage/exchange.The problem´s is that the ultra board I

exchanged with leaves my with a 375Mhz bandwidht and it´s 400Mhz 2 giga

sticks.

So I got another motherboard(Brand new)to put all the leftovers in and build

a new

and buy her´s OEM.It´s AM2 AMD´s maybe that board gives 400Mhz it´s my dayly

use computer so it means a lot while heat is on....the Internet and gaming.

Although I've never had your problem, I recently updated my memory on my

Vista OEM computer and that started to ask for activation again. When I

tried via the normal internet option it refused and asked me to phone their

activation number which I did. I explained it was the same computer and I

had simply upgraded the RAM and they had no problem issuing me with a new

number.

Replacing a MOBO is considered a new computer by Microsoft, but if the

current MOBO is being replaced because it is not working, and not to upgrade

from a working board to a newer more functional board it can be explained

and is an exception.

 

"webfactor" <webfactor@discussions.microsoft.com> wrote in message

news:9FBDE5D9-833B-4CC7-9A1D-22B56B881D12@microsoft.com...

> May I change motherboard´s if so even hotplug it with windows installed on

> a

> STRIPE/0 or do I have to buy a new OEM Windows program and toss both

> motherboad and OS.I read the OEM manual and came to up and downgrading

> and swapped instead,I rather ask here at the newsgroup I get even tired

> reading the OEM manual it´s so restricted.

> I finally burned the bridge under the Grafic card.The wires to the cooler

> on

> the grafic card,had burned to a metallic plate on it and shorten the

> wires,so

> that it

> had stopped it´s rotation,meanwhile I accidently forgot to attach the

> front

> 12mm

> intake and a rear outblowing cooler had stopped in the heat,and there

> must

> have

> become so hot that the bridge down under have died because when I laid a

> hand

> It were much to hot,I found the incident by BSOD´s 2 minuttes after

> turning

> on the

> computer.I have hotplugged the windows on a raid on another

> motherboard(same

> Case and hardware except the motherboard off curse witch

> succeded after first montage/exchange.The problem´s is that the ultra

> board I

> exchanged with leaves my with a 375Mhz bandwidht and it´s 400Mhz 2 giga

> sticks.

> So I got another motherboard(Brand new)to put all the leftovers in and

> build

> a new

> and buy her´s OEM.It´s AM2 AMD´s maybe that board gives 400Mhz it´s my

> dayly

> use computer so it means a lot while heat is on....the Internet and

> gaming.

Thank´s alot.

Now I can relax a little about that.

The board is trashed and replaced.

If any requirement of phone call to representative

Microsoft operator,I will explain him the incident and

wait for further instruction,furthermore I will make a Genuie

Check.And consider this case solved until further notice.

Thanks to all..

Best regards

Signed.......webfactor

 

 

"John Barnes" wrote:

> Replacing a MOBO is considered a new computer by Microsoft, but if the

> current MOBO is being replaced because it is not working, and not to upgrade

> from a working board to a newer more functional board it can be explained

> and is an exception.

>

> "webfactor" <webfactor@discussions.microsoft.com> wrote in message

> news:9FBDE5D9-833B-4CC7-9A1D-22B56B881D12@microsoft.com...

> > May I change motherboard´s if so even hotplug it with windows installed on

> > a

> > STRIPE/0 or do I have to buy a new OEM Windows program and toss both

> > motherboad and OS.I read the OEM manual and came to up and downgrading

> > and swapped instead,I rather ask here at the newsgroup I get even tired

> > reading the OEM manual it´s so restricted.

> > I finally burned the bridge under the Grafic card.The wires to the cooler

> > on

> > the grafic card,had burned to a metallic plate on it and shorten the

> > wires,so

> > that it

> > had stopped it´s rotation,meanwhile I accidently forgot to attach the

> > front

> > 12mm

> > intake and a rear outblowing cooler had stopped in the heat,and there

> > must

> > have

> > become so hot that the bridge down under have died because when I laid a

> > hand

> > It were much to hot,I found the incident by BSOD´s 2 minuttes after

> > turning

> > on the

> > computer.I have hotplugged the windows on a raid on another

> > motherboard(same

> > Case and hardware except the motherboard off curse witch

> > succeded after first montage/exchange.The problem´s is that the ultra

> > board I

> > exchanged with leaves my with a 375Mhz bandwidht and it´s 400Mhz 2 giga

> > sticks.

> > So I got another motherboard(Brand new)to put all the leftovers in and

> > build

> > a new

> > and buy her´s OEM.It´s AM2 AMD´s maybe that board gives 400Mhz it´s my

> > dayly

> > use computer so it means a lot while heat is on....the Internet and

> > gaming.

>

>