Guest Robert Premuž Posted October 16, 2007 Posted October 16, 2007 Hi! I have a problem with time synchronization on a MS Windows Server 2003 SP2. In the Windows domain there are two DCs (both Windows Server 2003 SP2). Their Windows Time Services (W32Time) are set as follows (I used advice in http://technet2.microsoft.com/windowsserver/en/library/a0fcd250-e5f7-41b3-b0e8-240f8236e2101033.mspx?mfr=true ): The DC1 (has PDC role) synchronizes time with two NTP servers on the Internet (zg1.ntp.carnet.hr and zg2.ntp.carnet.hr). I set this using the following commands: w32tm /config /update /manualpeerlist:"zg1.ntp.CARNet.hr,0x8 zg2.ntp.CARNet.hr,0x8" /syncfromflags:manual /reliable:yes net stop w32time net start w32time w32tm /resync /rediscover The DC2 synchronizes time with DC1. I set this using the following commands: w32tm /config /update /syncfromflags:domhier /reliable:no net stop w32time net start w32time w32tm /resync /rediscover (Workstations synchronizes time with the domain, i.e. with DC1.) After these settings I notice messages in the System Event Log of DC2 which show that the Time Service had to make a discontinuous change in the system clock. This event happens approximately every 3 hours. Here is an example of a series of events that are logged: Event Type: Warning Event Source: W32Time Event Category: None Event ID: 51 Date: 15.10.2007 Time: 22:40:55 Computer: DC2 Description: Time Provider NtpClient: The time sample received from peer DC1.foo.bar (ntp.d|192.168.1.13:123->192.168.1.11:123) differs from the local time by 9 seconds. The observed transmission delay from the server was 0 milliseconds. Event Type: Warning Event Source: W32Time Event Category: None Event ID: 50 Date: 15.10.2007 Time: 22:41:09 Computer: DC2 Description: The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself. Event Type: Warning Event Source: W32Time Event Category: None Event ID: 51 Date: 15.10.2007 Time: 22:58:00 Computer: DC2 Description: Time Provider NtpClient: The time sample received from peer DC1.foo.bar (ntp.d|192.168.1.13:123->192.168.1.11:123) differs from the local time by 12 seconds. The observed transmission delay from the server was 15 milliseconds. Event Type: Warning Event Source: W32Time Event Category: None Event ID: 33 Date: 15.10.2007 Time: 22:58:25 Computer: DC2 Description: The time service has made a discontinuous change in the system clock. The system time has been changed by +11 seconds. People that are familiar with NTP servers on Unix systems gave me the following explanation of the problem: the hardware clock frequency on DC2 has error (about 0,1 %) but the Windows Time service cannot take the clock drift into account (as a NTP server on Unix). It can only correct system time by discontinuous changes. Can someone comment on this? Are there some settings for Windows Time service that can solve this problem? TIA -- rpr. /Robert Premuž/ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.