NetApp Cloud Volume ONTAP (CVO) for Azure – EDA Benchmark and Best Practices

Co-authors:

• Meng-Ru (Raymond) Tsai Senior Program Manager, Azure HPC+AI, Microsoft
  
• Tang Chao, Solutions Architect, NetApp
  
• Virgilio Inferido, Member of Technical Staff, NetApp
  
• Giancarlo DiPasquale, Azure HPC Architect, Microsoft
  
• Richard Paw, Director, Semiconductors & EDA, Azure Global, Microsoft.
  
• Jon Austin, Azure HPC Architect, Microsoft
  

Objective

NetApp Cloud Volumes ONTAP (CVO) is a full featured ONTAP NAS solution that runs on the Azure High Performance Compute (HPC) stack. It is a complementary offering to the fully managed Azure NetApp Files, Enterprise-grade NAS.

This article provides benchmark reference and architectural guidance to customers who are considering migration of their Electronic Design Automation (EDA) workload to Azure, using CVO as the NFS solution. Furthermore, it provides guidance on where and how to best deploy CVO for EDA workloads. This article focuses on benchmark performance and does not address CVO setup or configuration.

EDA workloads are demanding, even for on-premises hardware. In the cloud, EDA workloads need the most performant storage solution possible. Our goal was to find the configuration with the best benchmark performance.

Where to use CVO

1. Azure regions where Azure NetApp Files (ANF) is not available.
   

Note: ANF is the suggested NFS solution for running EDA workloads on Azure. ANF lets customers provision the desired size of ONTAP volumes in seconds without ONTAP administration tasks like setup, configuration, or upgrade.

1. Customers using a hybrid-cloud use case where data, tools or libraries are synchronized or replicated between Azure and on-premises NetApp.
   
2. Customers who need to integrate existing ONTAP CLI and ZAPI scripts and workflows that were built around NetApp ONTAP operating systems for compatibility reasons.
   
3. Customers who prefer to manage their ONTAP upgrade rhythm on their own or use bring-your-own-license (BYOL) to Azure.
   
4. Customers who use enhanced support with third-party LDAP or other authentication solutions not available with ANF.
   

Table 1 below shows the high-level comparison between ANF and CVO, to help with the CVO and ANF selection process.

Table 1: The high-level comparison between ANF and CVO from the administrator’s point of view.

Note that storage aggregates need to be managed by customer in CVO (source: NetApp)

An industry standard benchmark was used rather than a generic IO benchmark tool like “fio” or “dd”, which generate predictable workload patterns. The tool instead provides workloads that more closely resemble those encountered in EDA to provide industry relevant results.

Azure architecture for EDA workloads

Figure 1: High-level Azure architecture for EDA workloads

Figure 1 below shows a high-level architecture diagram for running EDA workloads in Azure, which includes compute, storage, networking, and orchestration components. The area highlighted by the red rectangle indicates the NFS solution. Our experience shows that the appropriate NFS solution is critical to performance, as it needs to provide sufficient IOPS and throughput with small latency, generally < 2 milliseconds (ms) per operation, to fulfill the different requirements of EDA workloads. We will be focusing on benchmarking NetApp CVO on Azure to help construct a performant NFS storage solution. We will not be addressing ANF in this article.

Figure 2: High-level Azure architecture for EDA workloads with CVO

Benchmarking architecture

In all tests, Cloud Volumes ONTAP 9.11.1 was used. The clients were 24 type E16ds_v4 VMs running OS RHEL 7.9. Accelerated Networking was enabled and the NFSv3 protocol was used.

Three CVO configurations were tested:

1. CVO Single Instance
   
2. CVO HA Active/Active
   
3. CVO HA Active/Passive
   

CVO Single Instance Configuration

• E48ds_v4 (top-end) | DS5_v2 (mid-range)
  
• One LIF
  
• 24TB FlexGroup (8 constituents)
  
• LDM (High write speed) Enabled
  
• SIDL (Single Instance Data Logging) Off
  
• Twelve Premium SSD aggregate at 2TB size per disk
  

CVO HA Active/Active Configuration

• E48ds_v4 (top-end) | DS5_v2 (mid-range)
  
• Two LIFs
  
• 48TB FlexGroup (8 constituents) per node
  
• LDM (High write speed) Enabled
  
• SIDL (Single Instance Data Logging) Off
  
• Twelve Premium SSD aggregate at 2TB size per disk
  

CVO HA Active/Passive Configuration

• E48ds_v4 (top-end) | DS5_v2 (mid-range)
  
• One LIF
  
• 24TB FlexGroup (8 constituents)
  
• LDM (High write speed) Enabled
  
• SIDL (Single Instance Data Logging) Off
  
• Twelve Premium SSD aggregate at 2TB size per disk
  

Cost/Performance Assessment

Table 2: Assessment of three CVO for Azure configurations for EDA workloads

NetApp Cloud Volume ONTAP (CVO) on Azure provides semiconductor customers with alternatives for NFS operations where Azure NetApp Files (ANF) is not available in the region or ONTAP features are required, i.e. FlexCache, CLI, ZAPI, etc., when high performance NFS storage is needed for EDA workloads.

Additional Resources

• Learn more about Azure High Performance Computing
  
• Azure high-performance computing (HPC) for silicon
  
• Azure for the semiconductor industry
  
• NetApp Cloud Volumes ONTAP
  
• Electronic Design Automation best practices in ONTAP
  
• EDA workloads on Azure NetApp Files- Performance Best Practice
  

Continue reading...