mikehende Posted January 27, 2015 Posted January 27, 2015 Hey guys, very first time I am coming across this issue, all screws removed from this unit but pulling on the middle plastic insert does not slide the HDD off it's connection? It's almost as if the HDD is glued to the casing as I can't lift off the back it either. Quote
FPCH Admin allheart55 Cindy E Posted January 27, 2015 FPCH Admin Posted January 27, 2015 It looks as if there are screws on the sides, Mike. Quote ~I know that you believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant.~ ~~Robert McCloskey~~
mikehende Posted January 27, 2015 Author Posted January 27, 2015 Yes but those should be the caddy screws? I am sure those screws are not part of the HDD removal process. Quote
Rich-M Posted January 28, 2015 Posted January 28, 2015 Probably not Mike but I have done plenty of Gateway laptops and never seen one not come off. Are you certain you have all the screws out? Could there be one more under the front of the drive we cannot see in the photo. You can try placing a flat screw driver between the drive and the sata port and gently inching it forward. I had a Dell Vostro one time where the whole drive connection was corroded somehow and broke off while I was trying to remove the drive and that unfortunately totaled the laptop. Quote
mikehende Posted January 28, 2015 Author Posted January 28, 2015 I have done plenty of Gateway laptops and never seen one not come off. Are you certain you have all the screws out? Could there be one more under the front of the drive we cannot see in the photo. Same here, I have worked on gateways before, 123 process, remove the caddy screws, lift the middle plastic insert and pull the drive out of the sata port. No mistake or other screws anywhere and I had initially tried placing a flat screw driver between the drive and the sata port and gently inching it forward before posting here but this thing is stuck and I don't wish to do any damage. I already told the owner the deal. Quote
Rich-M Posted January 28, 2015 Posted January 28, 2015 Yeah might as well err on the side of caution. The one I broke was my own that I took in trade and it was cheaper to toss it then replace the motherboard, all that Dell could suggest. Quote
Recommended Posts