sea68iou1 Posted October 2, 2004 Posted October 2, 2004 i just built a computer using an Asus p4c800-e deluxe. when i start it up all fans run but thats all the computer does is run, nothing on monitor, no beeps and its not booting... anyone have this problem or know any solution? Quote
FPCH Admin AWS Posted October 3, 2004 FPCH Admin Posted October 3, 2004 Make sure the vid car is properly seated. Make sure cpu and memory is properly seated and are not dead. Put in one stick of ram and vid card and try to boot. Once it successfully boots add the other periphs. Quote Off Topic Forum - Unlike the Rest
malakipaa Posted October 8, 2004 Posted October 8, 2004 Hello guys I have the same problem with my Asus P5gd1-vm It wont boot up. No Display. NO beep. But when I remove the memory it will beep those error codes. I dont know what to do next. I'm electronics Tech. I consider myself pretty good with computer. I checked the CMOS BATTERY VOLTAGE, Power suplly Voltages. They are good. But this one is a headache for me. I suspect anyway that the motherboard is damaged. My memory is Samsung ddr400. The exact model of memory is not on the APPROVED LIST according to Asus. Could this be the problem?And could this motherboard to picky with memory? By the way my retailer warranty is over. I dont know how much hazzle or how long Asus will replace this board if i send it. Thanks guys, for any help. Quote
bmbigel Posted October 29, 2004 Posted October 29, 2004 Do you have both power suppy cables connected to the MB?? Quote
Recommended Posts