innova97 Posted August 16, 2008 Posted August 16, 2008 i have problem when installing Windows 2008 Server 64 bit. Cpu system always restart after finishing install proces. CPU configuration : AMD Opteron 8214 (4 pcs) TYAN n4250QE server board ddr2 CORSAIR ECC REGISTER pc667 1GB X 8 HDD SATA 160GB WDC PS. SilverStone OP-1000 DVDRW PIONEER 20x IDE Please help me to resolve this problem. Best Regards, Adi Fu Quote
FPCH Admin AWS Posted August 16, 2008 FPCH Admin Posted August 16, 2008 Must be a driver problem. Does you motherboard need drivers loaded to install? Quote Off Topic Forum - Unlike the Rest
innova97 Posted August 17, 2008 Author Posted August 17, 2008 Must be a driver problem. Does you motherboard need drivers loaded to install? sata driver successfully loaded. after all installing process, windows can not boot from harddisc. Thanks, Quote
FPCH Admin AWS Posted August 17, 2008 FPCH Admin Posted August 17, 2008 Are you installing in a dual boot environment? Quote Off Topic Forum - Unlike the Rest
innova97 Posted August 18, 2008 Author Posted August 18, 2008 Are you installing in a dual boot environment? no, only one OS Quote
innova97 Posted August 22, 2008 Author Posted August 22, 2008 how to test the memory performance or compatiblelity ? Quote
virtualinfo Posted September 10, 2008 Posted September 10, 2008 Hi innova97, Maybe, I would recommend you to use and review this reference material about the Microsoft Windows 2008 Hyper-V RTM Installation & Configuraiton step by step. Thanks. Always keepin' you in touch. Quote
lmdiablo Posted October 4, 2008 Posted October 4, 2008 Make sure that you're HDD where you want to put the OS is the bootable HDD in you're BIOS. I has the same problem. You can fix this in you're BIOS. as select 1st boot device as HDD insted something else. Don't use SATA in IDE-mode, that doesn't work also. Put it in AHCI. and that should work Quote
Recommended Posts