R
rokytnji
Code:
sh-4.1# su fido
sh-4.1$ inxi -Fxz
System: Host: puppypc1974 Kernel: 3.10.5 i686 (32 bit, gcc: 4.7.1)
Desktop: JWM git-835 Distro: Slacko Puppy Linux Linux 3.10.5 [ arch]
Machine: System: Hewlett-Packard (portable) product: Presario CQ57 Notebook PC version: 068C110003204910000620100
Mobo: Hewlett-Packard model: 3577 version: 24.48 Bios: Hewlett-Packard version: F.42 date: 11/07/2011
CPU: Dual core AMD C-50 (-MCP-) cache: 1024 KB flags: (lm nx pae sse sse2 sse3 sse4a ssse3 svm) bmips: 3993.86
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics: Card: ATI Device 9804 bus-ID: 00:01.0
X.Org: 1.12.4 drivers: ati,radeon (unloaded: vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Gallium 0.4 on AMD PALM GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Audio: Card: ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel bus-ID: 00:14.2 Sound: ALSA ver: k3.10.5
Network: Card-1: Ralink Device 5390 driver: rt2800pci ver: 2.3.0 bus-ID: 07:00.0
IF: wlan0 state: up speed: N/A duplex: N/A mac: <filter>
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: 2000 bus-ID: 06:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (-) 1: id: /dev/sda model: WDC_WD2500BEVT size: 250.1GB
Partition:
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 56.0C mobo: N/A gpu: 56.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 85 Uptime: 1:25 Memory: 219.0/1623.6MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell (sh) inxi: 1.9.18
sh-4.1$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/loop1 4.0G 287M 3.7G 8% /initrd/pup_rw
tmpfs 161M 160M 1000K 100% /initrd/mnt/tmpfs
/dev/loop0 160M 160M 0 100% /initrd/pup_ro2
/dev/loop4 140M 140M 0 100% /initrd/pup_ro4
unionfs 4.0G 287M 3.7G 8% /
tmpfs 406M 1.7M 405M 1% /tmp
shmfs 209M 4.0K 209M 1% /dev/shm
sh-4.1$ blkid
/dev/sda1: LABEL="SYSTEM" UUID="10703818703806CE" TYPE="ntfs"
/dev/sda3: LABEL="Recovery" UUID="EE34B6F134B6BBC1" TYPE="ntfs"
/dev/sda2: UUID="64F68FC2F68F92CA" TYPE="ntfs"
/dev/sda4: LABEL="HP_TOOLS" UUID="E4C1-BF34" TYPE="vfat"
/dev/loop1: UUID="0e7c7853-726b-4fd4-b00f-8ba34f0c592c" TYPE="ext3"
/dev/loop0: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
sh-4.1$ exit
exit
sh-4.1#
I am running this as a program in Windows 7.
Bootloader gives the option Windows 7 1st.
Slack0 Puppy 2nd.
blkid shows 4 primary Compaq Presario CQ57 ntfs partitions so I decided to run Linux this way till I save up enough pennies to swap out the drive. I could make the recovery disks (I already have made them) and wipe the drive clean but in case my wife
wants to use this and she has already dumped a lot of data
on here.
Well, instead of purge and burn. I'll compromise and swap out
the drive for a 500 gig 7200 rpm drive or a 2.5 SSD of about 128GIG.
Choice is good. If interested.
Install Puppy Linux in Windows - Releases - Puppy Linux News
Finished Product
Edit: You'll notice in my inxi readout that my ram usage while posting this with a browser open is only at 219MB.
Windows 7 can not match that. I am just guessing that though, being biased and all.
Continue reading...
sh-4.1# su fido
sh-4.1$ inxi -Fxz
System: Host: puppypc1974 Kernel: 3.10.5 i686 (32 bit, gcc: 4.7.1)
Desktop: JWM git-835 Distro: Slacko Puppy Linux Linux 3.10.5 [ arch]
Machine: System: Hewlett-Packard (portable) product: Presario CQ57 Notebook PC version: 068C110003204910000620100
Mobo: Hewlett-Packard model: 3577 version: 24.48 Bios: Hewlett-Packard version: F.42 date: 11/07/2011
CPU: Dual core AMD C-50 (-MCP-) cache: 1024 KB flags: (lm nx pae sse sse2 sse3 sse4a ssse3 svm) bmips: 3993.86
Clock Speeds: 1: 800.00 MHz 2: 800.00 MHz
Graphics: Card: ATI Device 9804 bus-ID: 00:01.0
X.Org: 1.12.4 drivers: ati,radeon (unloaded: vesa) Resolution: 1366x768@60.0hz
GLX Renderer: Gallium 0.4 on AMD PALM GLX Version: 2.1 Mesa 8.0.4 Direct Rendering: Yes
Audio: Card: ATI SBx00 Azalia (Intel HDA) driver: snd_hda_intel bus-ID: 00:14.2 Sound: ALSA ver: k3.10.5
Network: Card-1: Ralink Device 5390 driver: rt2800pci ver: 2.3.0 bus-ID: 07:00.0
IF: wlan0 state: up speed: N/A duplex: N/A mac: <filter>
Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller
driver: r8169 ver: 2.3LK-NAPI port: 2000 bus-ID: 06:00.0
IF: eth0 state: down mac: <filter>
Drives: HDD Total Size: 250.1GB (-) 1: id: /dev/sda model: WDC_WD2500BEVT size: 250.1GB
Partition:
RAID: No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors: System Temperatures: cpu: 56.0C mobo: N/A gpu: 56.0
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 85 Uptime: 1:25 Memory: 219.0/1623.6MB Runlevel: 5 Gcc sys: 4.7.1 Client: Shell (sh) inxi: 1.9.18
sh-4.1$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/loop1 4.0G 287M 3.7G 8% /initrd/pup_rw
tmpfs 161M 160M 1000K 100% /initrd/mnt/tmpfs
/dev/loop0 160M 160M 0 100% /initrd/pup_ro2
/dev/loop4 140M 140M 0 100% /initrd/pup_ro4
unionfs 4.0G 287M 3.7G 8% /
tmpfs 406M 1.7M 405M 1% /tmp
shmfs 209M 4.0K 209M 1% /dev/shm
sh-4.1$ blkid
/dev/sda1: LABEL="SYSTEM" UUID="10703818703806CE" TYPE="ntfs"
/dev/sda3: LABEL="Recovery" UUID="EE34B6F134B6BBC1" TYPE="ntfs"
/dev/sda2: UUID="64F68FC2F68F92CA" TYPE="ntfs"
/dev/sda4: LABEL="HP_TOOLS" UUID="E4C1-BF34" TYPE="vfat"
/dev/loop1: UUID="0e7c7853-726b-4fd4-b00f-8ba34f0c592c" TYPE="ext3"
/dev/loop0: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
sh-4.1$ exit
exit
sh-4.1#
I am running this as a program in Windows 7.
Bootloader gives the option Windows 7 1st.
Slack0 Puppy 2nd.
blkid shows 4 primary Compaq Presario CQ57 ntfs partitions so I decided to run Linux this way till I save up enough pennies to swap out the drive. I could make the recovery disks (I already have made them) and wipe the drive clean but in case my wife
wants to use this and she has already dumped a lot of data
on here.
Well, instead of purge and burn. I'll compromise and swap out
the drive for a 500 gig 7200 rpm drive or a 2.5 SSD of about 128GIG.
Choice is good. If interested.
Install Puppy Linux in Windows - Releases - Puppy Linux News
Finished Product
Edit: You'll notice in my inxi readout that my ram usage while posting this with a browser open is only at 219MB.
Windows 7 can not match that. I am just guessing that though, being biased and all.
Continue reading...