Windows 2000 Windows 2000 Bootup Issue

  • Thread starter Thread starter Joe
  • Start date Start date
J

Joe

One of our senior group members here has sent me this email and I don't know
how to help him.

On start-up, the screen shows the IBM motive and then,Press F1 for
configuration etc. (nothing happens)
Then it throws up the following message:-

"The RF-ID Tag has changed
184 Asset control antennae not detected

System Security is locked

PXE-MO4 - Initialising Network boot device using interrupt 18h.......
System Security -Keyboard is locked
176 The system has been tampered with

Turn power to your system off and then on
Your system is now locked."

I have tried multiple times to turn the power on and off, both at the
computer and at the switch on the wall plug, but cannot seem to get it
right.
Also over the past few days, there have been a few times when it has started
up correctly. I would appreciate comment or and is this a job for taking my
computer to experts.

Yours sincerely,
Peter

Is there any one in this group that could help us out with this problem?

I've never used Windows 2000 so I don't know what to advice to give him.

--

Regards
Joe
Tasmania
 
The senior group member will need to contact IBM tech support, the
problem has nothing to do with Windows, it is purely a hardware issue.

Joe wrote:

> One of our senior group members here has sent me this email and I don't know
> how to help him.
>
> On start-up, the screen shows the IBM motive and then,Press F1 for
> configuration etc. (nothing happens)
> Then it throws up the following message:-
>
> "The RF-ID Tag has changed
> 184 Asset control antennae not detected
>
> System Security is locked
>
> PXE-MO4 - Initialising Network boot device using interrupt 18h.......
> System Security -Keyboard is locked
> 176 The system has been tampered with
>
> Turn power to your system off and then on
> Your system is now locked."
>
> I have tried multiple times to turn the power on and off, both at the
> computer and at the switch on the wall plug, but cannot seem to get it
> right.
> Also over the past few days, there have been a few times when it has started
> up correctly. I would appreciate comment or and is this a job for taking my
> computer to experts.
>
> Yours sincerely,
> Peter
>
> Is there any one in this group that could help us out with this problem?
>
> I've never used Windows 2000 so I don't know what to advice to give him.
>
 
"Joe" <jogor@bigpond.net.au> wrote in message
news:ennt%23moVIHA.4740@TK2MSFTNGP02.phx.gbl...
>
> One of our senior group members here has sent me this email and I don't
know
> how to help him.
>
> On start-up, the screen shows the IBM motive and then,Press F1 for
> configuration etc. (nothing happens)
> Then it throws up the following message:-
>
> "The RF-ID Tag has changed
> 184 Asset control antennae not detected
>
> System Security is locked
>
> PXE-MO4 - Initialising Network boot device using interrupt 18h.......
> System Security -Keyboard is locked
> 176 The system has been tampered with
>
> Turn power to your system off and then on
> Your system is now locked."
>
> I have tried multiple times to turn the power on and off, both at the
> computer and at the switch on the wall plug, but cannot seem to get it
> right.
> Also over the past few days, there have been a few times when it has
started
> up correctly. I would appreciate comment or and is this a job for taking
my
> computer to experts.
>
> Yours sincerely,
> Peter
>
> Is there any one in this group that could help us out with this problem?
>
> I've never used Windows 2000 so I don't know what to advice to give him.
>
>

The machine is attempting a network boot...
more than likely because the HD is not detected.

have him go into to bios to see if the HD can be detected
and set it as the first boot device.

If no HD is detected then next step is to check the data cable...
if that's OK then the HD has probably failed
 
Thanks Bob and Philo for the information, I have passed it on to our member.

Appreciated

--

Regards
Joe
Tasmania
"philo" . wrote in message
news:OtMG1GvVIHA.5984@TK2MSFTNGP06.phx.gbl...
>
> "Joe" <jogor@bigpond.net.au> wrote in message
> news:ennt%23moVIHA.4740@TK2MSFTNGP02.phx.gbl...
>>
>> One of our senior group members here has sent me this email and I don't
> know
>> how to help him.
>>
>> On start-up, the screen shows the IBM motive and then,Press F1 for
>> configuration etc. (nothing happens)
>> Then it throws up the following message:-
>>
>> "The RF-ID Tag has changed
>> 184 Asset control antennae not detected
>>
>> System Security is locked
>>
>> PXE-MO4 - Initialising Network boot device using interrupt 18h.......
>> System Security -Keyboard is locked
>> 176 The system has been tampered with
>>
>> Turn power to your system off and then on
>> Your system is now locked."
>>
>> I have tried multiple times to turn the power on and off, both at the
>> computer and at the switch on the wall plug, but cannot seem to get it
>> right.
>> Also over the past few days, there have been a few times when it has
> started
>> up correctly. I would appreciate comment or and is this a job for taking
> my
>> computer to experts.
>>
>> Yours sincerely,
>> Peter
>>
>> Is there any one in this group that could help us out with this problem?
>>
>> I've never used Windows 2000 so I don't know what to advice to give him.
>>
>>
>
> The machine is attempting a network boot...
> more than likely because the HD is not detected.
>
> have him go into to bios to see if the HD can be detected
> and set it as the first boot device.
>
> If no HD is detected then next step is to check the data cable...
> if that's OK then the HD has probably failed
>
>
 
Last edited by a moderator:
"Joe" <jogor@bigpond.net.au> wrote in message
news:%23NNGm11VIHA.4696@TK2MSFTNGP05.phx.gbl...
> Thanks Bob and Philo for the information, I have passed it on to our
member.
>
> Appreciated
>
>


Ok...
If you get a chance, post back and let us know what happens
 
Back
Top