Hello y'all,
This is multi-question post, my apologies if it does not conform to this forum's protocol, I thought it would make more sense, than posting 3 different questions related to the same topic. Hope somebody more intelligent than I, can enlighten my electronically
challenged brain!
My HP p6320y desktop came w/a upgraded mother-board MSI 785GM-E51 (FX) military class II. It has DDR3 w/4 DIMM slots. According to the manual, I can use it in "dual-channel" mode. What are the pros and cons between DDR2 and DDR3,
& single or dual channel?
Right now, it has two 4GB memory modules installed in the 2 first slots (DIMM 1 & 2)
The manual specifies to be sure not to interchange DDR2 & DDR3. Hence, if I want to max out my ram, & run it in dual channel mode. I need to fill all 4 DIMM slots w/4GB DDR3 memory modules for a total= 16GB RAM.
Would running my M/board in dual channel mode w/16GB max. RAM make my system perform substantially faster/visibly better? Or could I use the cost of 2 xtra memory modules in a different way to give me a clearly observable bump in performance?
While were on boosting performance, would upgrading my current CPU (quad core AM3 phenom 2.7Ghz) to something above 3.0Ghz, be worth the effort & produce a observable bump in speed? Or would doing both be over-killing the M/board's potential?
Finally, the manual explains how to overclock my FSB in 3 incremental stages: 10%, 15%, 20%. Is it truly a hi-risk to ovr./clk. in comparison to the increase gained? Even on the low setting-10%? Would an extra fan counter the heat rise, thus allowing
a full life span?
Thanks kindly for any advice, Alan
View the thread
This is multi-question post, my apologies if it does not conform to this forum's protocol, I thought it would make more sense, than posting 3 different questions related to the same topic. Hope somebody more intelligent than I, can enlighten my electronically
challenged brain!
My HP p6320y desktop came w/a upgraded mother-board MSI 785GM-E51 (FX) military class II. It has DDR3 w/4 DIMM slots. According to the manual, I can use it in "dual-channel" mode. What are the pros and cons between DDR2 and DDR3,
& single or dual channel?
Right now, it has two 4GB memory modules installed in the 2 first slots (DIMM 1 & 2)
The manual specifies to be sure not to interchange DDR2 & DDR3. Hence, if I want to max out my ram, & run it in dual channel mode. I need to fill all 4 DIMM slots w/4GB DDR3 memory modules for a total= 16GB RAM.
Would running my M/board in dual channel mode w/16GB max. RAM make my system perform substantially faster/visibly better? Or could I use the cost of 2 xtra memory modules in a different way to give me a clearly observable bump in performance?
While were on boosting performance, would upgrading my current CPU (quad core AM3 phenom 2.7Ghz) to something above 3.0Ghz, be worth the effort & produce a observable bump in speed? Or would doing both be over-killing the M/board's potential?
Finally, the manual explains how to overclock my FSB in 3 incremental stages: 10%, 15%, 20%. Is it truly a hi-risk to ovr./clk. in comparison to the increase gained? Even on the low setting-10%? Would an extra fan counter the heat rise, thus allowing
a full life span?
Thanks kindly for any advice, Alan
View the thread