M
Mike J.S.
Okay, something weird is going on right now. I don't know what triggered it,
but I've been doing a lot of troubleshooting lately, before giving up and
reformatting my HD.
2407WFP-HC gets no signal on boot-up until Windows is loaded. Only then does
it turn on. The screen is connected via DVI (looks noticeably better than
VGA).
---
Troubleshooting :
When I plug a second simultaneous monitor (a BenQ CRT) in the video card's
(Asus EN6600GT) VGA slot , BOTH the CRT and the LCD display the full boot-up
routine (DOS visuals). And of course, the Windows portion.
Leave the VGA slot unplugged (with only the DVI plugged-in), and the whole
DOS boot-up routine is bypassed by the monitor again. It gets no signal
until Windows is loaded.
What gives?
but I've been doing a lot of troubleshooting lately, before giving up and
reformatting my HD.
2407WFP-HC gets no signal on boot-up until Windows is loaded. Only then does
it turn on. The screen is connected via DVI (looks noticeably better than
VGA).
---
Troubleshooting :
When I plug a second simultaneous monitor (a BenQ CRT) in the video card's
(Asus EN6600GT) VGA slot , BOTH the CRT and the LCD display the full boot-up
routine (DOS visuals). And of course, the Windows portion.
Leave the VGA slot unplugged (with only the DVI plugged-in), and the whole
DOS boot-up routine is bypassed by the monitor again. It gets no signal
until Windows is loaded.
What gives?