Hi everybody,
I'm a new user and I am not that good at Server OS.
I am useing Windows Home Server Vail . As far as I got to know it is the same kernel as Windows Server 2008 R2.
A few months ago I installed the WHS system and everything was all right. Besides to the folders existing ones on the system, I added (created) a few additional disk folders.
The Server consists of 8 disks of 1,5 TB and an additional disk for draft.
Recently the computer started showing blue screens. As a result of this a few of the disks became unaccessible. I can see them in My Computer, but I can't select them (clisking on them I can't access them: see attached picture).
I took all the disks and connected them to another computer and it does see them, they are accessible, but naturally I can't see anything, because it is a part of RAID, right?
When I get to Device Manager I see all of the disks, including all the controllers, with no errors.
Now I don't know what to do. There is a lot of data that I'm afraid to loose.
Please advice me what should I do. Is there any programm, which could help me recover teh data from those disks?
Please HELP ME!
My equipment:
Core 2 Quad Q6600 2.4Ghz 1066MHz @ OC 20% 3.2Ghz
Coolit ECO A.L.C CPU Water
Gigabyte GA-EP35-DS3
2x2GB OCZ Reaper HPC Edition Dual Channel 1066Mhz
2x1GB OCZ Reaper HPC Edition Dual Channel 1066Mhz
Point Of View Geforce 8400GS 256MB GDDR2 DVI
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Western Digital Passport Essential 250GB 2.5 Inch
Samsung S223B DVDRW x22 Black
SeaSonic 620W Modular 80+ Bronze Active
XClio 777 Super Tower
Via VT6421A SATA x3 Raid, IDE x1
Via VT6421A SATA x3 Raid, IDE x1
Via VT6421A SATA x3 Raid, IDE x1
I'm a new user and I am not that good at Server OS.
I am useing Windows Home Server Vail . As far as I got to know it is the same kernel as Windows Server 2008 R2.
A few months ago I installed the WHS system and everything was all right. Besides to the folders existing ones on the system, I added (created) a few additional disk folders.
The Server consists of 8 disks of 1,5 TB and an additional disk for draft.
Recently the computer started showing blue screens. As a result of this a few of the disks became unaccessible. I can see them in My Computer, but I can't select them (clisking on them I can't access them: see attached picture).
I took all the disks and connected them to another computer and it does see them, they are accessible, but naturally I can't see anything, because it is a part of RAID, right?
When I get to Device Manager I see all of the disks, including all the controllers, with no errors.
Now I don't know what to do. There is a lot of data that I'm afraid to loose.
Please advice me what should I do. Is there any programm, which could help me recover teh data from those disks?
Please HELP ME!
My equipment:
Core 2 Quad Q6600 2.4Ghz 1066MHz @ OC 20% 3.2Ghz
Coolit ECO A.L.C CPU Water
Gigabyte GA-EP35-DS3
2x2GB OCZ Reaper HPC Edition Dual Channel 1066Mhz
2x1GB OCZ Reaper HPC Edition Dual Channel 1066Mhz
Point Of View Geforce 8400GS 256MB GDDR2 DVI
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Seagate 1.5 TB, 7200 RPM, SATA-II
Western Digital Passport Essential 250GB 2.5 Inch
Samsung S223B DVDRW x22 Black
SeaSonic 620W Modular 80+ Bronze Active
XClio 777 Super Tower
Via VT6421A SATA x3 Raid, IDE x1
Via VT6421A SATA x3 Raid, IDE x1
Via VT6421A SATA x3 Raid, IDE x1
