Windows 2003 Server restart

  • Thread starter Thread starter MSExchangeStudent
  • Start date Start date
M

MSExchangeStudent

Hi all

I have format my server. Win2003 Server is now loaded on it. Everytime if i
leave the server without working on it for approx an hour it rebootes by
itself and stop at the option where it says :

System currently configured for Windows 2000

Press F1 to continue

Press F9 for ROM based setup utility

Press F10 for System Partition utilities
Press F12 for PXE Boot

Why is it doing this and how can i solve it?
 
Sounds like the BSOD. Check your Event Logs for clues. It could be a hardware
(bad RAM?) or driver issue.

"MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
news:%239AwArn3HHA.3900@TK2MSFTNGP02.phx.gbl...
> Hi all
>
> I have format my server. Win2003 Server is now loaded on it. Everytime if i
> leave the server without working on it for approx an hour it rebootes by
> itself and stop at the option where it says :
>
> System currently configured for Windows 2000
>
> Press F1 to continue
>
> Press F9 for ROM based setup utility
>
> Press F10 for System Partition utilities
> Press F12 for PXE Boot
>
> Why is it doing this and how can i solve it?
>
 
Black screen? Did you pull the CD out of the drive? (Just checking)

Sounds like a BIOS issue? Is the hard drive booting? Do you have all the
drivers loaded that need to be for disk adapterss? Still sounds like a BIOS
issue to me...

"MSExchangeStudent" wrote:

> Hi all
>
> I have format my server. Win2003 Server is now loaded on it. Everytime if i
> leave the server without working on it for approx an hour it rebootes by
> itself and stop at the option where it says :
>
> System currently configured for Windows 2000
>
> Press F1 to continue
>
> Press F9 for ROM based setup utility
>
> Press F10 for System Partition utilities
> Press F12 for PXE Boot
>
> Why is it doing this and how can i solve it?
>
>
>
 
Ummm, have you tryed setting the OS in the BIOS to 'Other'?

"MSExchangeStudent" wrote:

> Hi all
>
> I have format my server. Win2003 Server is now loaded on it. Everytime if i
> leave the server without working on it for approx an hour it rebootes by
> itself and stop at the option where it says :
>
> System currently configured for Windows 2000
>
> Press F1 to continue
>
> Press F9 for ROM based setup utility
>
> Press F10 for System Partition utilities
> Press F12 for PXE Boot
>
> Why is it doing this and how can i solve it?
>
>
>
 
Just curious... you dont happen to have an external USB drive plugged in to
the box and powered on while its trying to boot do you?


"MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
news:%239AwArn3HHA.3900@TK2MSFTNGP02.phx.gbl...
> Hi all
>
> I have format my server. Win2003 Server is now loaded on it. Everytime if
> i leave the server without working on it for approx an hour it rebootes by
> itself and stop at the option where it says :
>
> System currently configured for Windows 2000
>
> Press F1 to continue
>
> Press F9 for ROM based setup utility
>
> Press F10 for System Partition utilities
> Press F12 for PXE Boot
>
> Why is it doing this and how can i solve it?
>
 
HI, No i don't

"SeriousSam" wrote in message
news:Ob%23FsTo3HHA.4436@TK2MSFTNGP03.phx.gbl...
> Just curious... you dont happen to have an external USB drive plugged in
> to the box and powered on while its trying to boot do you?
>
>
> "MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
> news:%239AwArn3HHA.3900@TK2MSFTNGP02.phx.gbl...
>> Hi all
>>
>> I have format my server. Win2003 Server is now loaded on it. Everytime if
>> i leave the server without working on it for approx an hour it rebootes
>> by itself and stop at the option where it says :
>>
>> System currently configured for Windows 2000
>>
>> Press F1 to continue
>>
>> Press F9 for ROM based setup utility
>>
>> Press F10 for System Partition utilities
>> Press F12 for PXE Boot
>>
>> Why is it doing this and how can i solve it?
>>
>
>
 
Last edited by a moderator:
Hi guys

This is what happened now. this morning when i got to the pc, it did reboot
again and was on the screen that i described in the post where you press F1,
F9, etc. I then did press F1 to continue. It went to the screen where it
says " Booting from C-Drive" and stayed there for some time. I hit enter and
it seems to move on then. Now it is at the screen where it says :

"SCSI BIOS not installed!
Slot 0 Compaq Smart Array 5i Controller (32MB, v1.80) 1 Logical Drive
Tape drive(s) Detected:
SCSI Port 1: SCSI ID 3
1786-Slot 0 Drive Array Recovery Needed
The following SCSI drive(s) need Automatic Data Recovery
(rebuild)
SCSI Port 2: SCSI ID 1

Select F1 to continue with recovery of data to drive(s)
Select F2 to continue without recovery of data to drive(s)

(RESUME = "F1" OR "F2" Key)

This is excatly what is on my screen now. Does this help in showing you guys
perhaps what is faulty. Obviously i couldn't get into the event viewer yet
to post results. I'll press F1 and see what happens

"drkc" <drkc@discussions.microsoft.com> wrote in message
news:BCDFEC4F-39F5-4FFD-AB37-43A8C999E34C@microsoft.com...
> Black screen? Did you pull the CD out of the drive? (Just checking)
>
> Sounds like a BIOS issue? Is the hard drive booting? Do you have all the
> drivers loaded that need to be for disk adapterss? Still sounds like a
> BIOS
> issue to me...
>
> "MSExchangeStudent" wrote:
>
>> Hi all
>>
>> I have format my server. Win2003 Server is now loaded on it. Everytime if
>> i
>> leave the server without working on it for approx an hour it rebootes by
>> itself and stop at the option where it says :
>>
>> System currently configured for Windows 2000
>>
>> Press F1 to continue
>>
>> Press F9 for ROM based setup utility
>>
>> Press F10 for System Partition utilities
>> Press F12 for PXE Boot
>>
>> Why is it doing this and how can i solve it?
>>
>>
>>
 
Hi, event ID 10 is lots of times in the Application log and event ID 6008,
7001 and 7024 are in the System Log. Any ideas?

"Mike Lowery" <selfspam@mouse-potato.com> wrote in message
news:eYJliDo3HHA.4436@TK2MSFTNGP03.phx.gbl...
> Sounds like the BSOD. Check your Event Logs for clues. It could be a
> hardware (bad RAM?) or driver issue.
>
> "MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
> news:%239AwArn3HHA.3900@TK2MSFTNGP02.phx.gbl...
>> Hi all
>>
>> I have format my server. Win2003 Server is now loaded on it. Everytime if
>> i leave the server without working on it for approx an hour it rebootes
>> by itself and stop at the option where it says :
>>
>> System currently configured for Windows 2000
>>
>> Press F1 to continue
>>
>> Press F9 for ROM based setup utility
>>
>> Press F10 for System Partition utilities
>> Press F12 for PXE Boot
>>
>> Why is it doing this and how can i solve it?
>>
>
>
 
I'm struggling to get into the BIOS. How do i get there. Have a HP ML370 T02
P1400 EU 2004 EURO server
"drkc" <drkc@discussions.microsoft.com> wrote in message
news:84E8CB23-3777-4CDB-94AE-01646D8438A7@microsoft.com...
> Ummm, have you tryed setting the OS in the BIOS to 'Other'?
>
> "MSExchangeStudent" wrote:
>
>> Hi all
>>
>> I have format my server. Win2003 Server is now loaded on it. Everytime if
>> i
>> leave the server without working on it for approx an hour it rebootes by
>> itself and stop at the option where it says :
>>
>> System currently configured for Windows 2000
>>
>> Press F1 to continue
>>
>> Press F9 for ROM based setup utility
>>
>> Press F10 for System Partition utilities
>> Press F12 for PXE Boot
>>
>> Why is it doing this and how can i solve it?
>>
>>
>>
 
You'd have to post the actual error messages.

"MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
news:efFH4%23w3HHA.5184@TK2MSFTNGP02.phx.gbl...
> Hi, event ID 10 is lots of times in the Application log and event ID 6008,
> 7001 and 7024 are in the System Log. Any ideas?
>
> "Mike Lowery" <selfspam@mouse-potato.com> wrote in message
> news:eYJliDo3HHA.4436@TK2MSFTNGP03.phx.gbl...
>> Sounds like the BSOD. Check your Event Logs for clues. It could be a
>> hardware (bad RAM?) or driver issue.
>>
>> "MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
>> news:%239AwArn3HHA.3900@TK2MSFTNGP02.phx.gbl...
>>> Hi all
>>>
>>> I have format my server. Win2003 Server is now loaded on it. Everytime if i
>>> leave the server without working on it for approx an hour it rebootes by
>>> itself and stop at the option where it says :
>>>
>>> System currently configured for Windows 2000
>>>
>>> Press F1 to continue
>>>
>>> Press F9 for ROM based setup utility
>>>
>>> Press F10 for System Partition utilities
>>> Press F12 for PXE Boot
>>>
>>> Why is it doing this and how can i solve it?
>>>
>>
>>
>
>
 
Sounds like a failed RAID array.

"MSExchangeStudent" <exchangestudent@newsgroups.com> wrote in message
news:OzYdf5v3HHA.1184@TK2MSFTNGP04.phx.gbl...
> Hi guys
>
> This is what happened now. this morning when i got to the pc, it did reboot
> again and was on the screen that i described in the post where you press F1,
> F9, etc. I then did press F1 to continue. It went to the screen where it says
> " Booting from C-Drive" and stayed there for some time. I hit enter and it
> seems to move on then. Now it is at the screen where it says :
>
> "SCSI BIOS not installed!
> Slot 0 Compaq Smart Array 5i Controller (32MB, v1.80) 1 Logical Drive
> Tape drive(s) Detected:
> SCSI Port 1: SCSI ID 3
> 1786-Slot 0 Drive Array Recovery Needed
> The following SCSI drive(s) need Automatic Data Recovery (rebuild)
> SCSI Port 2: SCSI ID 1
>
> Select F1 to continue with recovery of data to drive(s)
> Select F2 to continue without recovery of data to drive(s)
>
> (RESUME = "F1" OR "F2" Key)
>
> This is excatly what is on my screen now. Does this help in showing you guys
> perhaps what is faulty. Obviously i couldn't get into the event viewer yet to
> post results. I'll press F1 and see what happens
>
> "drkc" <drkc@discussions.microsoft.com> wrote in message
> news:BCDFEC4F-39F5-4FFD-AB37-43A8C999E34C@microsoft.com...
>> Black screen? Did you pull the CD out of the drive? (Just checking)
>>
>> Sounds like a BIOS issue? Is the hard drive booting? Do you have all the
>> drivers loaded that need to be for disk adapterss? Still sounds like a BIOS
>> issue to me...
>>
>> "MSExchangeStudent" wrote:
>>
>>> Hi all
>>>
>>> I have format my server. Win2003 Server is now loaded on it. Everytime if i
>>> leave the server without working on it for approx an hour it rebootes by
>>> itself and stop at the option where it says :
>>>
>>> System currently configured for Windows 2000
>>>
>>> Press F1 to continue
>>>
>>> Press F9 for ROM based setup utility
>>>
>>> Press F10 for System Partition utilities
>>> Press F12 for PXE Boot
>>>
>>> Why is it doing this and how can i solve it?
>>>
>>>
>>>
>
>
 
Is it every hour on the hour? If so it sounds like the license might have
fallen out of its grace period. Have you checked to see if the OS is
licensed?
--
This post is provided as-is and is my opinion, check the facts before doing
anything in production.

http://blogs.technet.com/brad_rutkowski


"MSExchangeStudent" wrote:

> Hi all
>
> I have format my server. Win2003 Server is now loaded on it. Everytime if i
> leave the server without working on it for approx an hour it rebootes by
> itself and stop at the option where it says :
>
> System currently configured for Windows 2000
>
> Press F1 to continue
>
> Press F9 for ROM based setup utility
>
> Press F10 for System Partition utilities
> Press F12 for PXE Boot
>
> Why is it doing this and how can i solve it?
>
>
>
 
Back
Top