Only once my 512 mb card worked. I can't remember how it happened,
and can't reproduce it again.
Every time I insert this card, it appears with code 10 in dev. manager.
This card works well in a USB reader so I can live wih this , but
hoped to use also the new HC cards...
--PA
"Kenn" wrote:
> Yes I found a driver at Lenovo by searching for "SD Card Driver XP R61" and
> found it to be a Richoh 4 in 1 driver.
>
> Worked a treat on my 512Mb SD card.
>
> Kenn
>
> "Pavel A." wrote:
>
> > "Kenn" wrote:
> > > I have just run into the same problem but I can probably confirm that it is
> > > not the hardware. I have an R61 running Vista Bus who's SD card reader works
> > > fine on a 512Mb card and an X61 also running Vista Bus that also works. When
> > > I stick the same card into an R61 running XP pro - no go. I get the boing to
> > > say that the card has been inserted but it doesn't appear as a drive.
> > >
> > > So, the problem would seem to be XP's drivers rather than the hardware. Of
> > > coursa, XP says it is using the latest driver. So, perhaps, Lenovo have an XP
> > > version?
> >
> > Thanks for sharing, Kenn.
> > The flash drivers for T61 are not developed by Lenovo.
> > They are from Ricoh (I guess). I got the latest from Lenovo site.
> > .
> >
> > --PA
> >
> > > Stuffing the card into an external USB reader works perfectly well. What is
> > > the point of having a built in reader that doesn't work?
> > >
> > >
> > > "smlunatick" wrote:
> > >
> > > > On Nov 24, 11:52 am, "Pavel A." <pave...@NOwritemeNO.com> wrote:
> > > > > Dear experts,
> > > > >
> > > > > I have a T61 laptop with WinXP SP2.
> > > > >
> > > > > The problem is that the SD slot does not work with some SD flash memory cards.
> > > > > Cards of 16 or 32 MB work fine (so I assume that the slot and divers are ok) -
> > > > > but 512 MB card gives error 10 in device manager.
> > > > > A1 GB Sandisk micro SD card (in SD adapter) is not even detected.
> > > > >
> > > > > Is there a limit of card size for WinXP SD driver?
> > > > >
> > > > > All tested cards are formatted and working well with a SD to USB adapter.
> > > > >
> > > > > Regards,
> > > > > --PA
> > > >
> > > > There is a possible hardware limit on the SD slot.