PROBLEM AFTER NEW MOTHERBOARD INSTALLED

  • Thread starter Thread starter johnp
  • Start date Start date
J

johnp

My motherboard failed, it kept switching the computer off, so I purchased and
installed a new board, I am running Windows XP Prof, when I boot up now I get
the error code 0x0000007b, the system shut down and tries to reboot.

I know the mother board is OK, I put a new hard drive in and reloaded
windows, and it works OK, I know the original Hard Drive is OK, it still
works on the old motherboard, other than the problem I have with the board.

Can aynone help other than reinstalling XP again on the old drive, which I
fear I will loose all my programs and data
 
http://support.microsoft.com/kb/324103

--

db ·´¯`·.¸. , . .·´¯`·..><)))º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><)))º>¸.
><)))º>·´¯`·.¸. , . .·´¯`·.. ><)))º>`·.¸¸.·´¯`·.¸.·´¯`·...¸><)))º>



..


"johnp" <johnp@discussions.microsoft.com> wrote in message
news:83C604D6-AAE8-4204-A426-EF1D80B03C5A@microsoft.com...
> My motherboard failed, it kept switching the computer off, so I purchased and
> installed a new board, I am running Windows XP Prof, when I boot up now I get
> the error code 0x0000007b, the system shut down and tries to reboot.
>
> I know the mother board is OK, I put a new hard drive in and reloaded
> windows, and it works OK, I know the original Hard Drive is OK, it still
> works on the old motherboard, other than the problem I have with the board.
>
> Can aynone help other than reinstalling XP again on the old drive, which I
> fear I will loose all my programs and data
 
Unless the new motherboard is an exact or similar replacement that is
perfectly normal. You need to perform a repair installation to get your
original XP load running again.

--

----
Crosspost, do not multipost http://www.blakjak.demon.co.uk/mul_crss.htm
How to ask a question http://support.microsoft.com/kb/555375
_________________________________________________________________________________


"johnp" <johnp@discussions.microsoft.com> wrote in message
news:83C604D6-AAE8-4204-A426-EF1D80B03C5A@microsoft.com...
> My motherboard failed, it kept switching the computer off, so I purchased
> and
> installed a new board, I am running Windows XP Prof, when I boot up now I
> get
> the error code 0x0000007b, the system shut down and tries to reboot.
>
> I know the mother board is OK, I put a new hard drive in and reloaded
> windows, and it works OK, I know the original Hard Drive is OK, it still
> works on the old motherboard, other than the problem I have with the
> board.
>
> Can aynone help other than reinstalling XP again on the old drive, which I
> fear I will loose all my programs and data
 
"johnp" <johnp@discussions.microsoft.com> wrote in message
news:83C604D6-AAE8-4204-A426-EF1D80B03C5A@microsoft.com...
> My motherboard failed, it kept switching the computer off, so I purchased
> and
> installed a new board, I am running Windows XP Prof, when I boot up now I
> get
> the error code 0x0000007b, the system shut down and tries to reboot.
>
> I know the mother board is OK, I put a new hard drive in and reloaded
> windows, and it works OK, I know the original Hard Drive is OK, it still
> works on the old motherboard, other than the problem I have with the
> board.
>
> Can aynone help other than reinstalling XP again on the old drive, which I
> fear I will loose all my programs and data


In this case, all you do is boot from the CD and do a repair install. This
should retain all your apps, data, and settings.

However, it will not have the updates, which you'll have to go and re-apply.

HTH
-pk
 
Patrick Keenan wrote:
> "johnp" <johnp@discussions.microsoft.com> wrote in message
> news:83C604D6-AAE8-4204-A426-EF1D80B03C5A@microsoft.com...
>> My motherboard failed, it kept switching the computer off, so I
>> purchased and
>> installed a new board, I am running Windows XP Prof, when I boot up
>> now I get
>> the error code 0x0000007b, the system shut down and tries to reboot.
>>
>> I know the mother board is OK, I put a new hard drive in and reloaded
>> windows, and it works OK, I know the original Hard Drive is OK, it
>> still works on the old motherboard, other than the problem I have
>> with the board.
>>
>> Can aynone help other than reinstalling XP again on the old drive,
>> which I fear I will loose all my programs and data

>
> In this case, all you do is boot from the CD and do a repair install.
> This should retain all your apps, data, and settings.


I would like to add that in almost all cases, it will indeed work the
way Patrick just described.

However, since nothing in life is 100% certain, if you have valuable
data, back it up first.

Here is a good link for a Repair Install:

http://www.michaelstevenstech.com/XPrepairinstall.htm
 
johnp wrote:
> My motherboard failed, it kept switching the computer off, so I purchased and
> installed a new board, I am running Windows XP Prof, when I boot up now I get
> the error code 0x0000007b, the system shut down and tries to reboot.
>
> I know the mother board is OK, I put a new hard drive in and reloaded
> windows, and it works OK, I know the original Hard Drive is OK, it still
> works on the old motherboard, other than the problem I have with the board.
>
> Can aynone help other than reinstalling XP again on the old drive, which I
> fear I will loose all my programs and data



Normally, and assuming a retail license (many factory-installed OEM
installations are BIOS-locked to a specific motherboard chipset and
therefore are *not* transferable to a new motherboard - check yours
before starting), unless the new motherboard is virtually identical
(same chipset, same IDE controllers, same BIOS version, etc.) to the one
on which the WinXP installation was originally performed, you'll need to
perform a repair (a.k.a. in-place upgrade) installation, at the very least:

How to Perform an In-Place Upgrade of Windows XP
http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341

Changing a Motherboard or Moving a Hard Drive with WinXP Installed
http://www.michaelstevenstech.com/moving_xp.html

The "why" is quite simple, really, and has nothing to do with
licensing issues, per se; it's a purely technical matter, at this point.
You've pulled the proverbial hardware rug out from under the OS. (If
you don't like -- or get -- the rug analogy, think of it as picking up a
Cape Cod style home and then setting it down onto a Ranch style
foundation. It just isn't going to fit.) WinXP, like Win2K before it,
is not nearly as "promiscuous" as Win9x when it comes to accepting any
old hardware configuration you throw at it. On installation it
"tailors" itself to the specific hardware found. This is one of the
reasons that the entire WinNT/2K/XP OS family is so much more stable
than the Win9x group.

As always when undertaking such a significant change, back up any
important data before starting.

This will also probably require re-activation, unless you have a
Volume Licensed version of WinXP Pro installed. If it's been more than
120 days since you last activated that specific Product Key, you'll most
likely be able to activate via the Internet without problem. If it's
been less, you might have to make a 5 minute phone call.


--

Bruce Chambers

Help us help you:
http://www.catb.org/~esr/faqs/smart-questions.html

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot
 
Thank you all for your help, I will let you know how I get on

Thanks - John

"Bruce Chambers" wrote:

> johnp wrote:
> > My motherboard failed, it kept switching the computer off, so I purchased and
> > installed a new board, I am running Windows XP Prof, when I boot up now I get
> > the error code 0x0000007b, the system shut down and tries to reboot.
> >
> > I know the mother board is OK, I put a new hard drive in and reloaded
> > windows, and it works OK, I know the original Hard Drive is OK, it still
> > works on the old motherboard, other than the problem I have with the board.
> >
> > Can aynone help other than reinstalling XP again on the old drive, which I
> > fear I will loose all my programs and data

>
>
> Normally, and assuming a retail license (many factory-installed OEM
> installations are BIOS-locked to a specific motherboard chipset and
> therefore are *not* transferable to a new motherboard - check yours
> before starting), unless the new motherboard is virtually identical
> (same chipset, same IDE controllers, same BIOS version, etc.) to the one
> on which the WinXP installation was originally performed, you'll need to
> perform a repair (a.k.a. in-place upgrade) installation, at the very least:
>
> How to Perform an In-Place Upgrade of Windows XP
> http://support.microsoft.com/directory/article.asp?ID=KB;EN-US;Q315341
>
> Changing a Motherboard or Moving a Hard Drive with WinXP Installed
> http://www.michaelstevenstech.com/moving_xp.html
>
> The "why" is quite simple, really, and has nothing to do with
> licensing issues, per se; it's a purely technical matter, at this point.
> You've pulled the proverbial hardware rug out from under the OS. (If
> you don't like -- or get -- the rug analogy, think of it as picking up a
> Cape Cod style home and then setting it down onto a Ranch style
> foundation. It just isn't going to fit.) WinXP, like Win2K before it,
> is not nearly as "promiscuous" as Win9x when it comes to accepting any
> old hardware configuration you throw at it. On installation it
> "tailors" itself to the specific hardware found. This is one of the
> reasons that the entire WinNT/2K/XP OS family is so much more stable
> than the Win9x group.
>
> As always when undertaking such a significant change, back up any
> important data before starting.
>
> This will also probably require re-activation, unless you have a
> Volume Licensed version of WinXP Pro installed. If it's been more than
> 120 days since you last activated that specific Product Key, you'll most
> likely be able to activate via the Internet without problem. If it's
> been less, you might have to make a 5 minute phone call.
>
>
> --
>
> Bruce Chambers
>
> Help us help you:
> http://www.catb.org/~esr/faqs/smart-questions.html
>
> They that can give up essential liberty to obtain a little temporary
> safety deserve neither liberty nor safety. ~Benjamin Franklin
>
> Many people would rather die than think; in fact, most do. ~Bertrand Russell
>
> The philosopher has never killed any priests, whereas the priest has
> killed a great many philosophers.
> ~ Denis Diderot
>
 
Back
Top