My Fujifilm Digital Camera and my PC don't want to talk

[Tnafbrat]

I've installed the software, downloaded the Win 98 drivers from fujifilm,
installed them, etc yet when I plug my camera into the usb port & turn it on
I get a communications error. The port works on my other usb devices and the
camera/usb cable works on other computers. I'm banging my head .... Any Help
out there?
--
Tnafbrat

 

[philo]

"Tnafbrat" <Tnafbrat@discussions.microsoft.com> wrote in message
news:A6CCF84C-4AF3-42DA-9348-16C6BE28580B@microsoft.com...
> I've installed the software, downloaded the Win 98 drivers from fujifilm,
> installed them, etc yet when I plug my camera into the usb port & turn it
on
> I get a communications error. The port works on my other usb devices and
the
> camera/usb cable works on other computers. I'm banging my head .... Any
Help
> out there?


It's usually a lot easier to just get a card reader

 

[Tnafbrat]

Is a card reader similar to a usb hub?

 

[philo]

"Tnafbrat" <Tnafbrat@discussions.microsoft.com> wrote in message
news:47D7C7E1-E482-46F8-97BD-6915FD685933@microsoft.com...
> Is a card reader similar to a usb hub?
>

The card reader would plug into your USB2...
get a card reader that's for the memory card inside the camera...

 

[philo]

> >
>
> The card reader would plug into your USB2...
> get a card reader that's for the memory card inside the camera...
>
>


Should have said that USB1 will work too...
just quite a bit slower

 

[mm]

On Sat, 29 Dec 2007 17:13:37 -0600, "philo" <philo@privacy.net> wrote:

>
>
>> >
>>
>> The card reader would plug into your USB2...
>> get a card reader that's for the memory card inside the camera...
>>
>>
>
>
>Should have said that USB1 will work too...
>just quite a bit slower

I just got back from vacation, during which I bought a Fujifilm
camera. A guy I met had a messed up memory card, and his camera --
brand I don't remmeber -- and I took it to the camera store which said
he had a virus in the card, and that he must have gotten it from the
computer he used, and that this problem would be avoided by using a
card reader instead of plugging into the camera. But two guys on the
photography newsgroup said that was likely a bunch of hooey, that a
card reader wouldn't protect the camera or the card because the
computer couldn't transfer a virus to either of them. Who is right?

BTW, he didn't use a computer between the time the camera worked and
the time it didn't. He didn't even have his computer with him. He
just took pictures one day and it worked and the next day it wouldn't
work. He tried his memory card in another camera and it didn't work
there either (and he may have tried another card in his camera and it
did work.)(

The camera store said it got 150 pictures off the card and that he
could reformat it and it would be good again.

Who is telling the truth?
>


If you are inclined to email me
for some reason, remove NOPSAM

 

[philo]

"mm" <NOPSAMmm2005@bigfoot.com> wrote in message
news:js0en39b3bb48qkhsp29bhvqcnd7lgbtqg@4ax.com...
> On Sat, 29 Dec 2007 17:13:37 -0600, "philo" <philo@privacy.net> wrote:
>
> >
> >
> >> >
> >>
> >> The card reader would plug into your USB2...
> >> get a card reader that's for the memory card inside the camera...
> >>
> >>
> >
> >
> >Should have said that USB1 will work too...
> >just quite a bit slower
>
> I just got back from vacation, during which I bought a Fujifilm
> camera. A guy I met had a messed up memory card, and his camera --
> brand I don't remmeber -- and I took it to the camera store which said
> he had a virus in the card, and that he must have gotten it from the
> computer he used, and that this problem would be avoided by using a
> card reader instead of plugging into the camera. But two guys on the
> photography newsgroup said that was likely a bunch of hooey, that a
> card reader wouldn't protect the camera or the card because the
> computer couldn't transfer a virus to either of them. Who is right?
>
> BTW, he didn't use a computer between the time the camera worked and
> the time it didn't. He didn't even have his computer with him. He
> just took pictures one day and it worked and the next day it wouldn't
> work. He tried his memory card in another camera and it didn't work
> there either (and he may have tried another card in his camera and it
> did work.)(
>
> The camera store said it got 150 pictures off the card and that he
> could reformat it and it would be good again.
>
> Who is telling the truth?
> >


If a computer was infected with a virus....then I suppose It's possible it
could spread to a camera's
memory card. Using a card reader would be no safer.

However...if the camera was not even connected to the computer...
the card could not have been infected with a virus.
More than likely, the file system had gotten corrupted...
possibly by removing the card while data was still being transferred.

 

[Tnafbrat]

"philo" wrote:
> However...if the camera was not even connected to the computer...
> the card could not have been infected with a virus.
> More than likely, the file system had gotten corrupted...
> possibly by removing the card while data was still being transferred.
>
This does sound more likely .. though I suppose there might be a way for
someone to create a virus that would "move against the flow", usually, you're
transferring from the camera TO the computer and it doesn't seem logical that
a virus could move from the computer to the card or camera during that type
of transfer. Though I guess it could if you were transfering From the
computer TO the card or camera.

Thanks for the info on the readers philo. that does seem to be the easiest
solution and since all my other usb devices work fine (as well as the hub),
it seems like the perfect solution for me .... at least until I break down
and upgrade to xp ... I just HATE redoing and reloading everything. Lazy is
my middle name lol

mm, drop a note in here if you find out more on that.

 

[philo]

"Tnafbrat" <Tnafbrat@discussions.microsoft.com> wrote in message
news:656BB0E0-8C59-4E9E-B0F7-786B8B30CA21@microsoft.com...
>
> "philo" wrote:
> > However...if the camera was not even connected to the computer...
> > the card could not have been infected with a virus.
> > More than likely, the file system had gotten corrupted...
> > possibly by removing the card while data was still being transferred.
> >
> This does sound more likely .. though I suppose there might be a way for
> someone to create a virus that would "move against the flow", usually,
you're
> transferring from the camera TO the computer and it doesn't seem logical
that
> a virus could move from the computer to the card or camera during that
type
> of transfer. Though I guess it could if you were transfering From the
> computer TO the card or camera.
>
> Thanks for the info on the readers philo. that does seem to be the easiest
> solution and since all my other usb devices work fine (as well as the
hub),
> it seems like the perfect solution for me .... at least until I break down
> and upgrade to xp ... I just HATE redoing and reloading everything. Lazy
is
> my middle name lol
>
> mm, drop a note in here if you find out more on that.


Nothing wrong with being "lazy".
If your present machine does the job...why change things.

Anyway just check out the specs on the card reader to make sure it will work
with win98