Monitor switch off on bootup

  • Thread starter Thread starter AdzTheWise@googlemail.com
  • Start date Start date
A

AdzTheWise@googlemail.com

Hey all, i figured it out once a long time ago, but ill be damned if i
can again!

ok, monitor's on and powered, displays "no signal" and pc is off, But
when i turn on the pc and plug in the monitor it goes into standby
mode after about 2 seconds... ive seen this time and time again so
hopeing its common and you may have the answer.

Thanx,
Adz.
 
Hello,

Is there *anything* displayed when the PC is switched on? Does the PC look
like as if it is booting up as normal other than the blank display?

If so, try swapping the monitor and checking the connections.

--
Singapore Website Design
http://www.bootstrike.com/Webdesign/
Singapore Web Hosting
http://www.bootstrike.com/WinXP/faq.html
Windows XP FAQ

<AdzTheWise@googlemail.com> wrote in message
news:1183765291.457533.147050@g13g2000hsf.googlegroups.com...
> Hey all, i figured it out once a long time ago, but ill be damned if i
> can again!
>
> ok, monitor's on and powered, displays "no signal" and pc is off, But
> when i turn on the pc and plug in the monitor it goes into standby
> mode after about 2 seconds... ive seen this time and time again so
> hopeing its common and you may have the answer.
>
> Thanx,
> Adz.
>
 
Hi Adz,

Replace the Computer's Graphic Card or have it repair, if under
Warranty. The Monitor should be receiving a signal from the computer, even
when the computer is turned off or not plugged in.


--
thecreator

<AdzTheWise@googlemail.com> wrote in message
news:1183765291.457533.147050@g13g2000hsf.googlegroups.com...
> Hey all, i figured it out once a long time ago, but ill be damned if i
> can again!
>
> ok, monitor's on and powered, displays "no signal" and pc is off, But
> when i turn on the pc and plug in the monitor it goes into standby
> mode after about 2 seconds... ive seen this time and time again so
> hopeing its common and you may have the answer.
>
> Thanx,
> Adz.
>
 
Back
Top