P
postcd
I got physical dedicated server from one reputable server provider. And using their OS image install system i applied debian 6.x 64. Server has 2 SSD and one SATA. I setup software raid 1 during installation on SSDs but i dont see anything that looks like my HDD setup..
I mean server should contain:
Quote:
#Onboard: Corsair CSSD-F120GB2
DRIVE1 /dev/sda
#Onboard: Corsair CSSD-F120GB2
DRIVE2 /dev/sdb
#Onboard: SAMSUNG HD753LJ (700gb+)
###DRIVE3 /dev/sdc
But this is df -h:
Quote:
Filesystem Size Used Avail Use% Mounted on
/dev/md2 98G 696M 93G 1% /
tmpfs 12G 0 12G 0% /lib/init/rwudev 12G 192K 12G 1% /dev
tmpfs 12G 0 12G 0% /dev/shm
/dev/md1 496M 31M 440M 7% /boot
I have been told that i need to mount 700+GB hdd: "add it to fstab our mount it manually via mount command"
Can you please advice on how to proceed, how to do it properly so its mounted after each start? I thought Debian will setup disks automatically.
Continue reading...
I mean server should contain:
Quote:
#Onboard: Corsair CSSD-F120GB2
DRIVE1 /dev/sda
#Onboard: Corsair CSSD-F120GB2
DRIVE2 /dev/sdb
#Onboard: SAMSUNG HD753LJ (700gb+)
###DRIVE3 /dev/sdc
But this is df -h:
Quote:
Filesystem Size Used Avail Use% Mounted on
/dev/md2 98G 696M 93G 1% /
tmpfs 12G 0 12G 0% /lib/init/rwudev 12G 192K 12G 1% /dev
tmpfs 12G 0 12G 0% /dev/shm
/dev/md1 496M 31M 440M 7% /boot
I have been told that i need to mount 700+GB hdd: "add it to fstab our mount it manually via mount command"
Can you please advice on how to proceed, how to do it properly so its mounted after each start? I thought Debian will setup disks automatically.
Continue reading...