Henry wrote:
| How do you format an NTFS drive to make it a FAT 32 drive please?
| Unfortunately, I need step by step instructions.
I think the others have answered this well enough, but best get the
latest FDISK first...
http://support.microsoft.com/?kbid=263044
Latest FDISK
It looks like this...
FDISK EXE 64,460 05-18-00 8:35a FDISK.EXE
Replace the one on your Startup Diskette, if it is different from that.
Get a Startup Diskette from...
http://www.bootdisk.com/ , if you don't already have one from "Control
Panel, Add/Remove Programs, Startup Disk tab". Take either one that
applies to your system. Test the Startup Diskette. Put the diskette in &
turn on the computer. Put in a CD and "DIR" the CD. That is, "DIR X:",
where "X:" is the CD-ROM letter. The Startup Diskette will say which
letter is the CD during boot. (Note: It may be necessary to enter BIOS
Setup & set it to boot the floppy drive above the hard drive.)
Careful you don't delete the wrong partition, if you have more than one!
| Henry
--
Thanks or Good Luck,
There may be humor in this post, and,
Naturally, you will not sue,
Should things get worse after this,
PCR
pcrrcp@netzero.net