Dual Boot Installation to External HD

  • Thread starter Thread starter JB1964
  • Start date Start date
J

JB1964

Are there any known issues with installing a second instance of XP to an
external USB HD? I have found nothing in the discussions that would lead me
to believe otherwise, but I still get a check disk error on the external
drive during installation. I have looked at every post I could find on dual
boot procedures and found nothing on this subject. I've run check disk on
the second drive and everything seems in order. It has two partitions and no
errors on either. Is the USB connection the culprit? Any help is greatly
appreciated!
 
"JB1964" wrote:
> Are there any known issues with installing a second instance of XP
> to an external USB HD?

Few BIOSes enable booting from a USB device.
If you are using a SATA hard drive, why not use an eSATA
connection to the external box? That would allow booting
and faster data access as well. Search groups.google.com
for "eSATA external" with "Timothy Daniels" as the author
in the past 2 weeks for equipment available.

*TimDaniels*
 
"JB1964" <JB1964@discussions.microsoft.com> wrote in message
news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
> Are there any known issues with installing a second instance of XP to an
> external USB HD? I have found nothing in the discussions that would lead
> me
> to believe otherwise, but I still get a check disk error on the external
> drive during installation. I have looked at every post I could find on
> dual
> boot procedures and found nothing on this subject. I've run check disk on
> the second drive and everything seems in order. It has two partitions and
> no
> errors on either. Is the USB connection the culprit? Any help is greatly
> appreciated!

Enter BIOS (Tap F2 or F5)
You will have to navigate your PC's BIOS and locate entry for
Legacy Devices and/or Legacy USB, it maybe under the advanced
option. Once located you have to activate then include it the Boot
sequence. Then XP should be more relaxed about being installed
on an externally connected USB drive.
Once installed you will also have to install a boot manager./loader,
this being a tool that allows you to select which installation to boot
from.
 
The basic issue would be whether you have two winxp licences?

"JB1964" <JB1964@discussions.microsoft.com> wrote in message
news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
> Are there any known issues with installing a second instance of XP to an
> external USB HD? I have found nothing in the discussions that would lead
> me
> to believe otherwise, but I still get a check disk error on the external
> drive during installation. I have looked at every post I could find on
> dual
> boot procedures and found nothing on this subject. I've run check disk on
> the second drive and everything seems in order. It has two partitions and
> no
> errors on either. Is the USB connection the culprit? Any help is greatly
> appreciated!
 
"Sister Mary" wrote:
> Enter BIOS (Tap F2 or F5)
> You will have to navigate your PC's BIOS and locate entry for
> Legacy Devices and/or Legacy USB, it maybe under the advanced
> option. Once located you have to activate then include it the Boot
> sequence. [......]


Yeah. "...include a USB device in the Boot Sequence", uh...
in the "Advanced" option. Got that? :-)

*TimDaniels*
 
"JB1964" <JB1964@discussions.microsoft.com> wrote in message
news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
> Are there any known issues with installing a second instance of XP to an
> external USB HD? I have found nothing in the discussions that would lead
> me
> to believe otherwise, but I still get a check disk error on the external
> drive during installation. I have looked at every post I could find on
> dual
> boot procedures and found nothing on this subject. I've run check disk on
> the second drive and everything seems in order. It has two partitions and
> no
> errors on either. Is the USB connection the culprit? Any help is greatly
> appreciated!

Very simply WINXP will not boot from an external USB drive. There have been
some who claim by 'hacking' the OS they have managed to boot WINXP from a
USB drive, however, I have tried and not succeeded. If you 'must' have
WINXP on an external drive then I think esata drives will 'work' as the
system essentially sees these drives in the same way as an internal drive.
 
"Timothy Daniels" <NoSpam@SpamMeNot.com> wrote in message
news:O1BvVInTIHA.3516@TK2MSFTNGP02.phx.gbl...
> "Sister Mary" wrote:
>> Enter BIOS (Tap F2 or F5)
>> You will have to navigate your PC's BIOS and locate entry for
>> Legacy Devices and/or Legacy USB, it maybe under the advanced
>> option. Once located you have to activate then include it the Boot
>> sequence. [......]
>
>
> Yeah. "...include a USB device in the Boot Sequence", uh...
> in the "Advanced" option. Got that? :-)
>
> *TimDaniels*
>
Re-read it carefully, I did not say "include a USB device"
I told the OP to activate and include *legacy* device/USB.
It will NOT be listed under USB. It is legacy devices and it
first has to be activated. Then a USB dvd can be used to
boot from an XP disc or a USB hard drive with an XP install.
Now go and learn about BIOS then you can join in the thread.
 
"Edward W. Thompson" <thomeduk1@btopenworld.com> wrote in message
news:unejKVpTIHA.280@TK2MSFTNGP03.phx.gbl...
>
> "JB1964" <JB1964@discussions.microsoft.com> wrote in message
> news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
>> Are there any known issues with installing a second instance of XP to an
>> external USB HD? I have found nothing in the discussions that would lead
>> me
>> to believe otherwise, but I still get a check disk error on the external
>> drive during installation. I have looked at every post I could find on
>> dual
>> boot procedures and found nothing on this subject. I've run check disk
>> on
>> the second drive and everything seems in order. It has two partitions and
>> no
>> errors on either. Is the USB connection the culprit? Any help is
>> greatly
>> appreciated!
>
> Very simply WINXP will not boot from an external USB drive. >snip

Oh yes it can. It just requires reconfiguring *legacy* devices in BIOS
 
"JB1964" <JB1964@discussions.microsoft.com> wrote in message
news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
> Are there any known issues with installing a second instance of XP to an
> external USB HD? I have found nothing in the discussions that would lead
> me
> to believe otherwise, but I still get a check disk error on the external
> drive during installation. I have looked at every post I could find on
> dual
> boot procedures and found nothing on this subject. I've run check disk on
> the second drive and everything seems in order. It has two partitions and
> no
> errors on either. Is the USB connection the culprit? Any help is greatly
> appreciated!

As you can see from how the thread has evolved you are getting
conflicting advice.
You can install and boot from a USB device, but the BIOS has to
be reconfigured. In all BIOS settings USB is activated by default.
But the setting you require is *Legacy* device which is DEactivated
by default. It won't be listed under USB, it may have it's own heading
or maybe listed under Advanced depending in your BIOS.
But it is *Legacy* device (Or "Legacy USB") that you have to activate.
Once you have installed XP to USB HDD there are pitfalls you have to
watch out for.
BIOS are configured to scan in a *sequence/order* looking for boot.ini
the usual setting for the scan is first a Floppy drive, if no boot it moves
to the CD/DVD drive, if no boot it then scans next in sequence being
the HDD. It will boot from the first it finds in the sequence, so if you
loaded an XP disk it will boot from that.
To be able to boot from the USB installation of XP, the USB connected
drive has to be activated under *Legacy* devices and then included in
the BIOS boot sequence, but including it in boot sequence you do so
as the last device, so the sequence would run as:
1 - Floppy (If one installed on your PC)
2 - CD/DVD drive
3 - "C" drive/partition as configured on your PC
4 - Legacy device
The problem being with that configuration is your PC will boot from
the C partition and never scan the legacy (USB). So you have to install a
tool that upon boot gives you the option to chose which device to
boot from. The obvious one being Acronis Boot Manager being an
excellent and established tool for the task, but it ain't free.
In google, If you type: boot sequence, boot loaders, boot managers
you should get plenty of results and some freeware options.
Once you have configured your PC you will find XP will install to the
*legacy* activated USB connected hard drive.

Anyone else who is interested, by activating *Legacy* devices in
the BIOS settings you will also be able to boot from an externally
connected USB DVD drive, this maybe of use to laptop owners
or hardware failure etc. But in such circumstance you set the *legacy*
device as first in Boot sequence.
 
ALL,
I truly appreciate the advice and am trying all aspects. In navigating my
bios, the only entry I could find that was even close to what is suggested
was "enable other boot device". This was disabled by default. I'd like some
feedback from SM if you believe this is referring to legacy systems.

Also, if I'm successful, can I not use windows boot .ini file to delineate
the two different boot options at start up?

I apologize ahead of time for any nub questions I just asked. Thanks again
to EVERYONE!
 
"JB1964" <JB1964@discussions.microsoft.com> wrote in message
news:B94A92C9-C9DB-48F0-B77A-4934C0C3E4B0@microsoft.com...
> ALL,
> I truly appreciate the advice and am trying all aspects. In navigating my
> bios, the only entry I could find that was even close to what is suggested
> was "enable other boot device".

Try it, if it dosen't do the task, whose BIOS is it?
Check their site for your BIOS configuration

This was disabled by default. I'd like some
> feedback from SM if you believe this is referring to legacy systems.
>
> Also, if I'm successful, can I not use windows boot .ini file to delineate
> the two different boot options at start up?
>
I've never done that, but you could try it, but a Boot manager tool makes
it so easy, at boot there is the screen with options and you just select
which to boot from.
 
Sister Mary wrote:
> "Edward W. Thompson" <thomeduk1@btopenworld.com> wrote in message
> news:unejKVpTIHA.280@TK2MSFTNGP03.phx.gbl...
>
>>"JB1964" <JB1964@discussions.microsoft.com> wrote in message
>>news:838C79B2-2E3D-461F-B13B-30D16F5D6535@microsoft.com...
>>
>>>Are there any known issues with installing a second instance of XP to an
>>>external USB HD? I have found nothing in the discussions that would lead
>>>me
>>>to believe otherwise, but I still get a check disk error on the external
>>>drive during installation. I have looked at every post I could find on
>>>dual
>>>boot procedures and found nothing on this subject. I've run check disk
>>>on
>>>the second drive and everything seems in order. It has two partitions and
>>>no
>>>errors on either. Is the USB connection the culprit? Any help is
>>>greatly
>>>appreciated!
>>
>>Very simply WINXP will not boot from an external USB drive. >snip
>
>
> Oh yes it can. It just requires reconfiguring *legacy* devices in BIOS

You can boot from a USB floppy or USB CD-ROM or even USB stick but
booting a full "Windows" installation on a USB hard disk is not a
supported scenario and not one that many have succeeded with! Some have
claimed to be able to do this but when asked for the recipe they all of
a sudden disappear from the discussion! I am not saying that this is
absolutely impossible, but I think it will require a lot more fiddling
than simply changing or reconfiguring the USB legacy devices in the
BIOS. If you search (really hard) on the net you will find reports of
some doing it and how they surmounted the obstacles, but you will also
find more reports of failure than you will of success stories.

I hope that the OP sticks to his or her endeavour and that you stick
with him or her to the end, it will be interesting to see how this
develops and hopefully we can all learn how to successfully install,
boot and run a Windows installation on an external USB drive!

John
 

Similar threads

AWS
Unified Update Platform with ConfigMgr – Questions from the Field
Replies
0
Views
139
AWS
AWS
AWS
Announcing the Release of Azure Data Studio 1.42
Replies
0
Views
145
AWS
AWS
AWS
How to Manage Microsoft Defender Policies with Intune on Non-Managed Devices
Replies
0
Views
156
AWS
AWS
AWS
Windows Autopilot | How It Works & How to Set It Up
Replies
0
Views
233
AWS
AWS
AWS
Get the most out of expedited Windows quality updates
Replies
0
Views
174
AWS
AWS
Back
Top