doing a repair install on on winxp without a cd drive?[boot.ini torun setup.exe]

[giddy]

hi,

I have a laptop, its cd drive is busted.Fortunately, i can take the
harddrive out. I used an IDE to USB cable and made an image of my
desktop pc(i want to transfer it to the laptop). I sucessfully
restored the image onto the laptop HDD. Also, i copied (first made an
image(.bin) then extracted) my winXP CD onto the 2nd partition of my
laptop HDD

When i fit the HDD back into the laptop, it, reasonably complains
theres a hardware problem.I get the regular "windows had problems
because of a recent hardware change. Do you want to : Safe Mode* ,
Last Know Good Cfg , Start WIndows Normally"
Windows doe'snt start at all, and safe mode hangs, which is all fine.
What i want to do is run setup.exe which is on the 2nd partition?? I
need to do a repair, but the cddrive is busted.

Can i configure boot like this?

[boot loader]
timeout = 30
default = multi(0)disk(0)rdisk(0)partition(2)\SETUP.EXE***

[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS = "Microsoft Windows XP
Professional" /fastdetect /NoExecute=OptIn
??

How can i have setup.exe run as soon as the pc starts???

Thanks so much

Gideon

 

[Bruce Chambers]

Re: doing a repair install on on winxp without a cd drive?[boot.inito run setup.exe]

giddy wrote:
> hi,
>
> I have a laptop, its cd drive is busted.Fortunately, i can take the
> harddrive out. I used an IDE to USB cable and made an image of my
> desktop pc(i want to transfer it to the laptop). I sucessfully
> restored the image onto the laptop HDD. Also, i copied (first made an
> image(.bin) then extracted) my winXP CD onto the 2nd partition of my
> laptop HDD
>
> When i fit the HDD back into the laptop, it, reasonably complains
> theres a hardware problem.I get the regular "windows had problems
> because of a recent hardware change. Do you want to : Safe Mode* ,
> Last Know Good Cfg , Start WIndows Normally"
> Windows doe'snt start at all, and safe mode hangs, which is all fine.
> What i want to do is run setup.exe which is on the 2nd partition?? I
> need to do a repair, but the cddrive is busted.
>

You'll need to fix/replace the CD drive.


> Can i configure boot like this?
>
> [boot loader]
> timeout = 30
> default = multi(0)disk(0)rdisk(0)partition(2)\SETUP.EXE***
>


You could, but it'll fail.


> [operating systems]
> multi(0)disk(0)rdisk(0)partition(1)\WINDOWS = "Microsoft Windows XP
> Professional" /fastdetect /NoExecute=OptIn
> ??
>
> How can i have setup.exe run as soon as the pc starts???
>

You can't. There would have to be an OS loaded first.


> Thanks so much
>
> Gideon


--

Bruce Chambers

Help us help you:
http://www.catb.org/~esr/faqs/smart-questions.html

They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety. ~Benjamin Franklin

Many people would rather die than think; in fact, most do. ~Bertrand Russell

The philosopher has never killed any priests, whereas the priest has
killed a great many philosophers.
~ Denis Diderot

 

[Pegasus \(MVP\)]

Re: doing a repair install on on winxp without a cd drive?[boot.ini to run setup.exe]

"giddy" <gidisrael@gmail.com> wrote in message
news:a2f57740-6671-4420-8e7c-7b8185b50bc7@a35g2000prf.googlegroups.com...
> hi,
>
> I have a laptop, its cd drive is busted.Fortunately, i can take the
> harddrive out. I used an IDE to USB cable and made an image of my
> desktop pc(i want to transfer it to the laptop). I sucessfully
> restored the image onto the laptop HDD. Also, i copied (first made an
> image(.bin) then extracted) my winXP CD onto the 2nd partition of my
> laptop HDD
>
> When i fit the HDD back into the laptop, it, reasonably complains
> theres a hardware problem.I get the regular "windows had problems
> because of a recent hardware change. Do you want to : Safe Mode* ,
> Last Know Good Cfg , Start WIndows Normally"
> Windows doe'snt start at all, and safe mode hangs, which is all fine.
> What i want to do is run setup.exe which is on the 2nd partition?? I
> need to do a repair, but the cddrive is busted.
>
> Can i configure boot like this?
>
> [boot loader]
> timeout = 30
> default = multi(0)disk(0)rdisk(0)partition(2)\SETUP.EXE***
>
> [operating systems]
> multi(0)disk(0)rdisk(0)partition(1)\WINDOWS = "Microsoft Windows XP
> Professional" /fastdetect /NoExecute=OptIn
> ??
>
> How can i have setup.exe run as soon as the pc starts???
>
> Thanks so much
>
> Gideon

There is a way to do this but not along the lines you suggested.
Try this for starters:
1. Connect the laptop disk to your desktop PC, using a 2.5" to
3.5" adapter (which is NOT the same as an IDE to USB adapter!)
2. Create a primary active 20 GByte FAT partition on it.
3. Boot the desktop PC with a Win98 boot disk from www.bootdisk.com.
4. Use this command to make the laptop disk bootable:
sys F: (where F: is the laptop drive)
5. Check if the laptop can be booted into DOS.

Report your progress here to get the remaining instructions.

 

[giddy]

Re: doing a repair install on on winxp without a cd drive?[boot.inito run setup.exe]

hi, thanks for the reply.

I finally managed to get *one* of the partitions on the laptop drive
bootable.
(I have C, D, E on the laptop) i did :
sys E:

But when i put the disk back in the laptop, it loads windows and
windows still complains.:
"Wndows did not start sucessfully, a recent hardware or software
change might have caused this"

Windows is installed on C: and programs on D:

How do i get to boot from the E:\ , sys partition??

Also, i copied the winxp cd on an iso, then extracted it on E:,

Thanks so much
Gideon

 

[Don R]

Re: doing a repair install on on winxp without a cd drive?[boot.inito run setup.exe]

giddy wrote:
> hi, thanks for the reply.
>
> I finally managed to get *one* of the partitions on the laptop drive
> bootable.
> (I have C, D, E on the laptop) i did :
> sys E:
>
> But when i put the disk back in the laptop, it loads windows and
> windows still complains.:
> "Wndows did not start sucessfully, a recent hardware or software
> change might have caused this"
>
> Windows is installed on C: and programs on D:
>
> How do i get to boot from the E:\ , sys partition??
>
> Also, i copied the winxp cd on an iso, then extracted it on E:,
>
> Thanks so much
> Gideon
>
I think you need to set the boot drive in BIOS.