deleted hard drive

  • Thread starter Thread starter jim33
  • Start date Start date
J

jim33

I have 2 HDD's and I have deleted the slave HD in disk manager.
Hardawre manager says the HD is working but Windows xp cannot find it.
There is no data to keep on the HD.
How do I get it back on the register.
 
What does deleted in Disk Managager mean?
Perhaps you need to reformat/partition it, in Disk Manager

"jim33" <jim33@discussions.microsoft.com> wrote in message
news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
>I have 2 HDD's and I have deleted the slave HD in disk manager.
> Hardawre manager says the HD is working but Windows xp cannot find it.
> There is no data to keep on the HD.
> How do I get it back on the register.
>
 
"jim33" <jim33@discussions.microsoft.com> wrote in message
news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> I have 2 HDD's and I have deleted the slave HD in disk manager.
> Hardawre manager says the HD is working but Windows xp cannot find it.
> There is no data to keep on the HD.
> How do I get it back on the register.
>


As long as there is no data on the drive you need...
just go back to disk management and recreate a partition there.

once it's formatted, it should automatically assign a drive letter
(or you can specify as desired)
 
The HD does not appear anywhere in disc manager.
how do I create a partition .

"philo" wrote:

>
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> > I have 2 HDD's and I have deleted the slave HD in disk manager.
> > Hardawre manager says the HD is working but Windows xp cannot find it.
> > There is no data to keep on the HD.
> > How do I get it back on the register.
> >
>
>
> As long as there is no data on the drive you need...
> just go back to disk management and recreate a partition there.
>
> once it's formatted, it should automatically assign a drive letter
> (or you can specify as desired)
>
>
>
 
The HD is not shown in disc manager.
how do I start to format /partition it

"DL" wrote:

> What does deleted in Disk Managager mean?
> Perhaps you need to reformat/partition it, in Disk Manager
>
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> >I have 2 HDD's and I have deleted the slave HD in disk manager.
> > Hardawre manager says the HD is working but Windows xp cannot find it.
> > There is no data to keep on the HD.
> > How do I get it back on the register.
> >
>
>
>
 
If the drive is still working then it should appear in disk management. How
did you delete it from disk management in the first place. You haven't
disturbed the ribbon cable to the drive have you. Is it a physical drive or
an extended partition. Is it a IDE drive or SATA. Does the drive show up in
the bios during boot.

Neil
"jim33" <jim33@discussions.microsoft.com> wrote in message
news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
> The HD is not shown in disc manager.
> how do I start to format /partition it
>
> "DL" wrote:
>
>> What does deleted in Disk Managager mean?
>> Perhaps you need to reformat/partition it, in Disk Manager
>>
>> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
>> >I have 2 HDD's and I have deleted the slave HD in disk manager.
>> > Hardawre manager says the HD is working but Windows xp cannot find it.
>> > There is no data to keep on the HD.
>> > How do I get it back on the register.
>> >
>>
>>
>>
 
It is a seperate IDE HD.
It shows in BIOS, and device manager says it works ok.
I was deleting 6 partitions on the HD and somehow the HD no longer shows as
a volume at all.
"neil" wrote:

> If the drive is still working then it should appear in disk management. How
> did you delete it from disk management in the first place. You haven't
> disturbed the ribbon cable to the drive have you. Is it a physical drive or
> an extended partition. Is it a IDE drive or SATA. Does the drive show up in
> the bios during boot.
>
> Neil
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
> > The HD is not shown in disc manager.
> > how do I start to format /partition it
> >
> > "DL" wrote:
> >
> >> What does deleted in Disk Managager mean?
> >> Perhaps you need to reformat/partition it, in Disk Manager
> >>
> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> >> >I have 2 HDD's and I have deleted the slave HD in disk manager.
> >> > Hardawre manager says the HD is working but Windows xp cannot find it.
> >> > There is no data to keep on the HD.
> >> > How do I get it back on the register.
> >> >
> >>
> >>
> >>
>
>
>
 
Hi,
Do you have a method of booting the PC other than XP just to check the drive
is visible. I mean a win98 boot disk or a CD live version of a linux
distribution. (anything like that) Just to be sure the drive is acessible.
See http://www.bootdisk.com/bootdisk.htm

Neil
"jim33" <jim33@discussions.microsoft.com> wrote in message
news:D0448AD5-BD80-42EB-83F4-D44125041BF1@microsoft.com...
> It is a seperate IDE HD.
> It shows in BIOS, and device manager says it works ok.
> I was deleting 6 partitions on the HD and somehow the HD no longer shows
> as
> a volume at all.
> "neil" wrote:
>
>> If the drive is still working then it should appear in disk management.
>> How
>> did you delete it from disk management in the first place. You haven't
>> disturbed the ribbon cable to the drive have you. Is it a physical drive
>> or
>> an extended partition. Is it a IDE drive or SATA. Does the drive show up
>> in
>> the bios during boot.
>>
>> Neil
>> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
>> > The HD is not shown in disc manager.
>> > how do I start to format /partition it
>> >
>> > "DL" wrote:
>> >
>> >> What does deleted in Disk Managager mean?
>> >> Perhaps you need to reformat/partition it, in Disk Manager
>> >>
>> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> >> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
>> >> >I have 2 HDD's and I have deleted the slave HD in disk manager.
>> >> > Hardawre manager says the HD is working but Windows xp cannot find
>> >> > it.
>> >> > There is no data to keep on the HD.
>> >> > How do I get it back on the register.
>> >> >
>> >>
>> >>
>> >>
>>
>>
>>
 
I tried reinstalling XP the HD showed but was inaccessable.
I have a LINUX disc and will try thanks for the advice.

"neil" wrote:

> Hi,
> Do you have a method of booting the PC other than XP just to check the drive
> is visible. I mean a win98 boot disk or a CD live version of a linux
> distribution. (anything like that) Just to be sure the drive is acessible.
> See http://www.bootdisk.com/bootdisk.htm
>
> Neil
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:D0448AD5-BD80-42EB-83F4-D44125041BF1@microsoft.com...
> > It is a seperate IDE HD.
> > It shows in BIOS, and device manager says it works ok.
> > I was deleting 6 partitions on the HD and somehow the HD no longer shows
> > as
> > a volume at all.
> > "neil" wrote:
> >
> >> If the drive is still working then it should appear in disk management.
> >> How
> >> did you delete it from disk management in the first place. You haven't
> >> disturbed the ribbon cable to the drive have you. Is it a physical drive
> >> or
> >> an extended partition. Is it a IDE drive or SATA. Does the drive show up
> >> in
> >> the bios during boot.
> >>
> >> Neil
> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
> >> > The HD is not shown in disc manager.
> >> > how do I start to format /partition it
> >> >
> >> > "DL" wrote:
> >> >
> >> >> What does deleted in Disk Managager mean?
> >> >> Perhaps you need to reformat/partition it, in Disk Manager
> >> >>
> >> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> >> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> >> >> >I have 2 HDD's and I have deleted the slave HD in disk manager.
> >> >> > Hardawre manager says the HD is working but Windows xp cannot find
> >> >> > it.
> >> >> > There is no data to keep on the HD.
> >> >> > How do I get it back on the register.
> >> >> >
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>
 
"jim33" <jim33@discussions.microsoft.com> wrote in message
news:22919176-BC36-45FA-8098-59BD92821F1C@microsoft.com...
> The HD does not appear anywhere in disc manager.
> how do I create a partition .
>


You can't!

the drive needs to be detected by the OS in order to function.

Check your cables and jumpers.

Does the bios detect the drive???
 
If you can see the drive in "disk management" now after you have reinstalled
windows are you not able to right click on the drive & use the create
partition wizard.??
Let me know what happens in Linux.
Neil
"jim33" <jim33@discussions.microsoft.com> wrote in message
news:AC0DB036-6FB7-401F-BAF9-5E9F0890D302@microsoft.com...
>I tried reinstalling XP the HD showed but was inaccessable.
> I have a LINUX disc and will try thanks for the advice.
>
> "neil" wrote:
>
>> Hi,
>> Do you have a method of booting the PC other than XP just to check the
>> drive
>> is visible. I mean a win98 boot disk or a CD live version of a linux
>> distribution. (anything like that) Just to be sure the drive is
>> acessible.
>> See http://www.bootdisk.com/bootdisk.htm
>>
>> Neil
>> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> news:D0448AD5-BD80-42EB-83F4-D44125041BF1@microsoft.com...
>> > It is a seperate IDE HD.
>> > It shows in BIOS, and device manager says it works ok.
>> > I was deleting 6 partitions on the HD and somehow the HD no longer
>> > shows
>> > as
>> > a volume at all.
>> > "neil" wrote:
>> >
>> >> If the drive is still working then it should appear in disk
>> >> management.
>> >> How
>> >> did you delete it from disk management in the first place. You haven't
>> >> disturbed the ribbon cable to the drive have you. Is it a physical
>> >> drive
>> >> or
>> >> an extended partition. Is it a IDE drive or SATA. Does the drive show
>> >> up
>> >> in
>> >> the bios during boot.
>> >>
>> >> Neil
>> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> >> news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
>> >> > The HD is not shown in disc manager.
>> >> > how do I start to format /partition it
>> >> >
>> >> > "DL" wrote:
>> >> >
>> >> >> What does deleted in Disk Managager mean?
>> >> >> Perhaps you need to reformat/partition it, in Disk Manager
>> >> >>
>> >> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
>> >> >> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
>> >> >> >I have 2 HDD's and I have deleted the slave HD in disk manager.
>> >> >> > Hardawre manager says the HD is working but Windows xp cannot
>> >> >> > find
>> >> >> > it.
>> >> >> > There is no data to keep on the HD.
>> >> >> > How do I get it back on the register.
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >>
>> >>
>> >>
>>
>>
>>
 
The HD does not show in disk management.
I have installed Linux on the disc and it boots OK so I have a dual boot
system and will leave it at that . Thanks for the help.
"neil" wrote:

> If you can see the drive in "disk management" now after you have reinstalled
> windows are you not able to right click on the drive & use the create
> partition wizard.??
> Let me know what happens in Linux.
> Neil
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:AC0DB036-6FB7-401F-BAF9-5E9F0890D302@microsoft.com...
> >I tried reinstalling XP the HD showed but was inaccessable.
> > I have a LINUX disc and will try thanks for the advice.
> >
> > "neil" wrote:
> >
> >> Hi,
> >> Do you have a method of booting the PC other than XP just to check the
> >> drive
> >> is visible. I mean a win98 boot disk or a CD live version of a linux
> >> distribution. (anything like that) Just to be sure the drive is
> >> acessible.
> >> See http://www.bootdisk.com/bootdisk.htm
> >>
> >> Neil
> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> news:D0448AD5-BD80-42EB-83F4-D44125041BF1@microsoft.com...
> >> > It is a seperate IDE HD.
> >> > It shows in BIOS, and device manager says it works ok.
> >> > I was deleting 6 partitions on the HD and somehow the HD no longer
> >> > shows
> >> > as
> >> > a volume at all.
> >> > "neil" wrote:
> >> >
> >> >> If the drive is still working then it should appear in disk
> >> >> management.
> >> >> How
> >> >> did you delete it from disk management in the first place. You haven't
> >> >> disturbed the ribbon cable to the drive have you. Is it a physical
> >> >> drive
> >> >> or
> >> >> an extended partition. Is it a IDE drive or SATA. Does the drive show
> >> >> up
> >> >> in
> >> >> the bios during boot.
> >> >>
> >> >> Neil
> >> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> >> news:1D1F11D7-54D0-4DAE-8593-3DE88589746A@microsoft.com...
> >> >> > The HD is not shown in disc manager.
> >> >> > how do I start to format /partition it
> >> >> >
> >> >> > "DL" wrote:
> >> >> >
> >> >> >> What does deleted in Disk Managager mean?
> >> >> >> Perhaps you need to reformat/partition it, in Disk Manager
> >> >> >>
> >> >> >> "jim33" <jim33@discussions.microsoft.com> wrote in message
> >> >> >> news:9F7BD109-F90F-47C8-B6D2-A9C903DC9CD7@microsoft.com...
> >> >> >> >I have 2 HDD's and I have deleted the slave HD in disk manager.
> >> >> >> > Hardawre manager says the HD is working but Windows xp cannot
> >> >> >> > find
> >> >> >> > it.
> >> >> >> > There is no data to keep on the HD.
> >> >> >> > How do I get it back on the register.
> >> >> >> >
> >> >> >>
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >>
> >>
> >>
> >>
>
>
>
 
Yes Bios detects the HD and it is in the device manager but there is no
volume in the my computer window.
I have installed Linux on the HD and that works OK I will leave it there.
Thanks for the help.

"philo" wrote:

>
> "jim33" <jim33@discussions.microsoft.com> wrote in message
> news:22919176-BC36-45FA-8098-59BD92821F1C@microsoft.com...
> > The HD does not appear anywhere in disc manager.
> > how do I create a partition .
> >
>
>
> You can't!
>
> the drive needs to be detected by the OS in order to function.
>
> Check your cables and jumpers.
>
> Does the bios detect the drive???
>
>
>
 
Back
Top