Windows 2003 Controller?

  • Thread starter Thread starter tlc
  • Start date Start date
T

tlc

We are running Server 2003 on Compaq Prolian ML370, 6 SCSI hot-swappable
36.4G drives, 2 mirrored O/S and 4 Raid 5, software as no array controller
available for hardware raid. Originally, one HD failed. It was replaced and
the mirror recreated. Next, RAID array disks, 3 offline and failed. Ran HP
diagnostic and 3 of 4 drives tested bad. Replaced drives, recreated array,
restored data. Now receiving following error: An error was detected on device
\Device\Harddisk3 during a paging operation, EVENT ID : 51and SCSI Physical
Drive Status Change.
The SCSI physical drive with SCSI target 2 connected to SCSI bus 4 of the
controller in slot 0 has a new status of 10.
(Drive status values: 1=other, 2=ok, 3=failed, 4=notConfigured, 5=badCable,
6=missingWasOk, 7=missingWasFailed, 8=predictiveFailure,
9=missingWasPredictiveFailure, 10=offline, 11=missingWasOffline)
[SNMP TRAP: 5020 in CPQSCSI.MIB].
Disks are able to be reactivated, but eventually fail, however, it is a
different disk each time. HELP!
 
Hi:

I suggest you to call HP and bring a technician with a new SCSI controller,
cables and the back panel, change them and test the server.

Let us know how it goes.

--
Un saludo
Juan Perez


"tlc" <tlc@discussions.microsoft.com> wrote in message
news:9C9A852C-046A-44D0-9611-2E5B91BA18A8@microsoft.com...
> We are running Server 2003 on Compaq Prolian ML370, 6 SCSI hot-swappable
> 36.4G drives, 2 mirrored O/S and 4 Raid 5, software as no array controller
> available for hardware raid. Originally, one HD failed. It was replaced
> and
> the mirror recreated. Next, RAID array disks, 3 offline and failed. Ran HP
> diagnostic and 3 of 4 drives tested bad. Replaced drives, recreated array,
> restored data. Now receiving following error: An error was detected on
> device
> \Device\Harddisk3 during a paging operation, EVENT ID : 51and SCSI
> Physical
> Drive Status Change.
> The SCSI physical drive with SCSI target 2 connected to SCSI bus 4 of the
> controller in slot 0 has a new status of 10.
> (Drive status values: 1=other, 2=ok, 3=failed, 4=notConfigured,
> 5=badCable,
> 6=missingWasOk, 7=missingWasFailed, 8=predictiveFailure,
> 9=missingWasPredictiveFailure, 10=offline, 11=missingWasOffline)
> [SNMP TRAP: 5020 in CPQSCSI.MIB].
> Disks are able to be reactivated, but eventually fail, however, it is a
> different disk each time. HELP!
>
>
 
I will do that,
Thanks,

"Juan Perez" wrote:

> Hi:
>
> I suggest you to call HP and bring a technician with a new SCSI controller,
> cables and the back panel, change them and test the server.
>
> Let us know how it goes.
>
> --
> Un saludo
> Juan Perez
>
>
> "tlc" <tlc@discussions.microsoft.com> wrote in message
> news:9C9A852C-046A-44D0-9611-2E5B91BA18A8@microsoft.com...
> > We are running Server 2003 on Compaq Prolian ML370, 6 SCSI hot-swappable
> > 36.4G drives, 2 mirrored O/S and 4 Raid 5, software as no array controller
> > available for hardware raid. Originally, one HD failed. It was replaced
> > and
> > the mirror recreated. Next, RAID array disks, 3 offline and failed. Ran HP
> > diagnostic and 3 of 4 drives tested bad. Replaced drives, recreated array,
> > restored data. Now receiving following error: An error was detected on
> > device
> > \Device\Harddisk3 during a paging operation, EVENT ID : 51and SCSI
> > Physical
> > Drive Status Change.
> > The SCSI physical drive with SCSI target 2 connected to SCSI bus 4 of the
> > controller in slot 0 has a new status of 10.
> > (Drive status values: 1=other, 2=ok, 3=failed, 4=notConfigured,
> > 5=badCable,
> > 6=missingWasOk, 7=missingWasFailed, 8=predictiveFailure,
> > 9=missingWasPredictiveFailure, 10=offline, 11=missingWasOffline)
> > [SNMP TRAP: 5020 in CPQSCSI.MIB].
> > Disks are able to be reactivated, but eventually fail, however, it is a
> > different disk each time. HELP!
> >
> >
>
>
>
 
Back
Top