Change HAL from "Advanced Configuration and Power Interface (ACPI) PC" to "ACPI Multiprocessor PC"

[LuciB23@gmail.com]

Hi,

I have an IBM M55 with windows XP installed. On this PC there is an
Intel Core 2 Duo installed.
After having XP installed, CPU-Z reports that 1 core is disabled. (See
below)
This is true, because checking task manager i can only see 1 cpu.
Device manager reports that my PC is an "Advanced Configuration and
Power Interface (ACPI) PC"

How can I change this from my current setting to "ACPI Multiprocessor
PC", without reinstalling XP?
I already tried to do "Update Driver", but the only 2 answers I get
are
"Advanced Configuration and Power Interface (ACPI) PC" and
"Standard PC"

http://support.microsoft.com/kb/309283


Is there any other way? Sysprep or other?

Thank you,
Lucian

CPU-Z dump:
__________________________________________
Processor 1 (ID = 0)
Number of cores 2 (1 core(s) disabled)
Number of threads 1 (max 2)
Name Intel Core 2 Duo E6300
Codename Conroe
Specification Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
Package Socket 775 LGA (platform ID = 0h)
CPUID 6.F.2
Extended CPUID 6.F
Core Stepping L2
Technology 65 nm
Core Speed 1584.0 MHz (6.0 x 264.0 MHz)
Rated Bus speed 1056.0 MHz
Stock frequency 1866 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte
line size
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 7.0x
max VID 1.213 V
Features XD, VT

 

[Trasparent]

RE: Change HAL from "Advanced Configuration and Power Interface (ACPI)

Lucian -

Start device manager.
In device manager expand 'Computer'
Under Computer you should see the currently installed 'HAL' information
"Advanced Configuration and Power Interface (ACPI) PC" (as you indicated
below)
Right click the (ACPI)PC device and chose 'Update Driver'
Select the (Advance) radio button in the Hardware Update Wizard and click
next.
Select 'Don't search. I will choose the driver to install' and click next.
Make sure the "Show compatible hardware" check box is checked on the next
screen
Select the correct HAL for your system type and follow the instruction from
the wizard to complete the install.
(Caution) Installing an incompatible HAL could severely reduce you systems
performance and indeed force you to rebuild it. If ‘ACPI Multiprocessor PC’
is not a part of the choices then there might be a configuration in your BIOS
which is disabling the second core or you might need a BIOS update.

Good Luck!

--
Just the facts


"LuciB23@gmail.com" wrote:

> Hi,
>
> I have an IBM M55 with windows XP installed. On this PC there is an
> Intel Core 2 Duo installed.
> After having XP installed, CPU-Z reports that 1 core is disabled. (See
> below)
> This is true, because checking task manager i can only see 1 cpu.
> Device manager reports that my PC is an "Advanced Configuration and
> Power Interface (ACPI) PC"
>
> How can I change this from my current setting to "ACPI Multiprocessor
> PC", without reinstalling XP?
> I already tried to do "Update Driver", but the only 2 answers I get
> are
> "Advanced Configuration and Power Interface (ACPI) PC" and
> "Standard PC"
>
> http://support.microsoft.com/kb/309283
>
>
> Is there any other way? Sysprep or other?
>
> Thank you,
> Lucian
>
> CPU-Z dump:
> __________________________________________
> Processor 1 (ID = 0)
> Number of cores 2 (1 core(s) disabled)
> Number of threads 1 (max 2)
> Name Intel Core 2 Duo E6300
> Codename Conroe
> Specification Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
> Package Socket 775 LGA (platform ID = 0h)
> CPUID 6.F.2
> Extended CPUID 6.F
> Core Stepping L2
> Technology 65 nm
> Core Speed 1584.0 MHz (6.0 x 264.0 MHz)
> Rated Bus speed 1056.0 MHz
> Stock frequency 1866 MHz
> Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
> L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
> L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte
> line size
> L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
> FID/VID Control yes
> FID range 6.0x - 7.0x
> max VID 1.213 V
> Features XD, VT
>
>