S
Sysu
Windows XP Home Edition SP3
IE 7
1024 Mb physical memory
1.00 GB Ram
System fully updated
After installing a game from a friend that did not work . I started having
all kinds of problems. After uninstalling game still same problems. I am
getting the same message when Windows abruptly shuts down. It is as follows:
First time happening, restart Windows-since it happened again it says to:
Change Video Adapter- I did that
Senfilt.sys_address fb8fec5c, base at fb8c7ooo, date stamp 414a45cc
Disable Bios memory options such as caching and shadowing
Driver in stop. oxoooooo8e (oxcooooo90, oxfb8fec 5c,oxfc6917b4, oxoooooooo)
My problem is HOW do I disable bios memory options like caching and
shadowing??????/ I have read that phrase all over the place, but can't find
anywhere on how. I already uninstalled PC games that I recently installed
and the problem started after that.
Also, I lost my Cd/dvd accessibility(CDGONE patch did not work). The only
F key that works is F-2. The Boot sequence and I believe Drive
Configurations is wrong too. The F-1 key does not respond when trying to
reboot. With all these problems I cannot correct the Boot Sequence, it is
set for Hard Disk because it says the CD-Rom is not installed. Please help.
Distressed without my PC.
"Malke" wrote:
> Paco wrote:
>
> > Not much of any help so for from this link Cari, but I'll do some
> > homework...
> > still, thanks!
> >
> > Keep it coming...
> >
> > Paco
> >
> > "Cari (MS-MVP)" wrote:
> >
> >> Have you worked your way through:
> >> http://aumha.org/win5/kbestop.php#0x0a
> >> --
> >> Cari (MS-MVP)
> >> Windows Technologies, Printing & Imaging
> >> http://www.coribright.com/windows
> >>
> >>
> >> "Paco" wrote in message
> >> news:B4448F70-9587-4E07-BEB3-D106DE85C2C6@microsoft.com...
> >> > Hello first!
> >> >
> >> > I have this AMD 1.3Ghz that, for as long as I can remember, got
> >> > problem starting "cold" in the morning (after being turned off for
> >> > a couples of hours
> >> > at least)... it never got problem restarting nor coming back from
> >> > stanby
> >> > mode. The problem is that I get a blue screen error message (and
> >> > dumping physical mem) and/or it just hang at different stage of the
> >> > startup (and I
> >> > have to hit the reset button)... and it will restart by itself say
> >> > two to tree time to started correctly and completly without
> >> > problem.
> >> >
> >> > The message (blue screen) I get (the one that I actually been able
> >> > to write
> >> > down!) is (if correctly wrote):
> >> >
> >> > DRIVERE_IRQL_NOT_LESS_OR_EQUAL
> >> >
> >> > Check to make sure any new hardware or software is properly
> >> > installed...
> >> >
> >> > STOP: 0X000000D1 (0X918B1AD9,0X000000FF,0X00000000,0X918B1AD9)
> >> >
> >> > Beginining dumping physical mem...
> >> >
> >> > If the problem continue, disable or remove any newly installed
> >> > hardware or
> >> > software. Disable BIOS memory options such as caching or
> >> > shadowing...
> >> >
> >> > I do have recently make a complete full clean installed and since
> >> > only have
> >> > the VERY necessary programs installed (bare minimum)...
> >> >
> >> > So, what's about it?!
> >> >
> >> > I have'nt yet foundede any relevant info about this blue screen
> >> > message on the Microsoft search...
> >> >
> >> > I tend to think that it's about hardware because it's only when the
> >> > PC has been off (shut down or hibernating) and not on restart or
> >> > coming back from stanby...
>
> I agree with you that it is probably hardware. However, first make sure
> that you've installed all drivers for your hardware. Never get drivers
> from Windows Update. Get them from:
>
> 1. The device mftr.'s website OR
> 2. The motherboard mftr.'s website if hardware is onboard OR
> 3. The OEM's website for your specific machine if you have an OEM
> computer (HP, Dell, Sony, etc.).
>
> Read the installation instructions on the website where you get the
> drivers.
>
> Once you've done that, I'd do some hardware troubleshooting starting
> with the RAM and the power supply. Here are general hardware t-shooting
> steps:
>
> 1) Open the computer and run it open, cleaning out all dust bunnies and
> observing all fans (overheating will cause system freezing). Obviously
> you can't do this with a laptop, but you can hear if the fan is running
> and feel if the laptop is getting too hot.
>
> 2) Test the RAM - I like Memtest86+ from www.memtest.org. Obviously, you
> have to get the program from a working machine. You will either
> download the precompiled Windows binary to make a bootable floppy or
> the .iso to make a bootable cd. If you want to use the latter, you'll
> need to have third-party burning software on the machine where you
> download the file - XP's built-in burning capability won't do the job.
> In either case, boot with the media you made. The test will run
> immediately. Let the test run for an hour or two - unless errors are
> seen immediately. If you get any errors, replace the RAM.
>
> 3) Test the hard drive with a diagnostic utility from the mftr. Download
> the file and make a bootable floppy or cd with it. Boot with the media
> and do a thorough test. If the drive has physical errors, replace it.
>
> 4) The power supply may be going bad or be inadequate for the devices
> you have in the system. The adequacy issue doesn't really apply to a
> laptop, although of course the power supply can be faulty.
>
> 5) Test the motherboard with something like TuffTest from
> www.tufftest.com. Sometimes this is useful, and sometimes it isn't.
>
> Testing hardware failures often involves swapping out suspected parts
> with known-good parts. If you can't do the testing yourself and/or are
> uncomfortable opening your computer, take the machine to a professional
> computer repair shop (not your local equivalent of BigStoreUSA).
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>
IE 7
1024 Mb physical memory
1.00 GB Ram
System fully updated
After installing a game from a friend that did not work . I started having
all kinds of problems. After uninstalling game still same problems. I am
getting the same message when Windows abruptly shuts down. It is as follows:
First time happening, restart Windows-since it happened again it says to:
Change Video Adapter- I did that
Senfilt.sys_address fb8fec5c, base at fb8c7ooo, date stamp 414a45cc
Disable Bios memory options such as caching and shadowing
Driver in stop. oxoooooo8e (oxcooooo90, oxfb8fec 5c,oxfc6917b4, oxoooooooo)
My problem is HOW do I disable bios memory options like caching and
shadowing??????/ I have read that phrase all over the place, but can't find
anywhere on how. I already uninstalled PC games that I recently installed
and the problem started after that.
Also, I lost my Cd/dvd accessibility(CDGONE patch did not work). The only
F key that works is F-2. The Boot sequence and I believe Drive
Configurations is wrong too. The F-1 key does not respond when trying to
reboot. With all these problems I cannot correct the Boot Sequence, it is
set for Hard Disk because it says the CD-Rom is not installed. Please help.
Distressed without my PC.
"Malke" wrote:
> Paco wrote:
>
> > Not much of any help so for from this link Cari, but I'll do some
> > homework...
> > still, thanks!
> >
> > Keep it coming...
> >
> > Paco
> >
> > "Cari (MS-MVP)" wrote:
> >
> >> Have you worked your way through:
> >> http://aumha.org/win5/kbestop.php#0x0a
> >> --
> >> Cari (MS-MVP)
> >> Windows Technologies, Printing & Imaging
> >> http://www.coribright.com/windows
> >>
> >>
> >> "Paco" wrote in message
> >> news:B4448F70-9587-4E07-BEB3-D106DE85C2C6@microsoft.com...
> >> > Hello first!
> >> >
> >> > I have this AMD 1.3Ghz that, for as long as I can remember, got
> >> > problem starting "cold" in the morning (after being turned off for
> >> > a couples of hours
> >> > at least)... it never got problem restarting nor coming back from
> >> > stanby
> >> > mode. The problem is that I get a blue screen error message (and
> >> > dumping physical mem) and/or it just hang at different stage of the
> >> > startup (and I
> >> > have to hit the reset button)... and it will restart by itself say
> >> > two to tree time to started correctly and completly without
> >> > problem.
> >> >
> >> > The message (blue screen) I get (the one that I actually been able
> >> > to write
> >> > down!) is (if correctly wrote):
> >> >
> >> > DRIVERE_IRQL_NOT_LESS_OR_EQUAL
> >> >
> >> > Check to make sure any new hardware or software is properly
> >> > installed...
> >> >
> >> > STOP: 0X000000D1 (0X918B1AD9,0X000000FF,0X00000000,0X918B1AD9)
> >> >
> >> > Beginining dumping physical mem...
> >> >
> >> > If the problem continue, disable or remove any newly installed
> >> > hardware or
> >> > software. Disable BIOS memory options such as caching or
> >> > shadowing...
> >> >
> >> > I do have recently make a complete full clean installed and since
> >> > only have
> >> > the VERY necessary programs installed (bare minimum)...
> >> >
> >> > So, what's about it?!
> >> >
> >> > I have'nt yet foundede any relevant info about this blue screen
> >> > message on the Microsoft search...
> >> >
> >> > I tend to think that it's about hardware because it's only when the
> >> > PC has been off (shut down or hibernating) and not on restart or
> >> > coming back from stanby...
>
> I agree with you that it is probably hardware. However, first make sure
> that you've installed all drivers for your hardware. Never get drivers
> from Windows Update. Get them from:
>
> 1. The device mftr.'s website OR
> 2. The motherboard mftr.'s website if hardware is onboard OR
> 3. The OEM's website for your specific machine if you have an OEM
> computer (HP, Dell, Sony, etc.).
>
> Read the installation instructions on the website where you get the
> drivers.
>
> Once you've done that, I'd do some hardware troubleshooting starting
> with the RAM and the power supply. Here are general hardware t-shooting
> steps:
>
> 1) Open the computer and run it open, cleaning out all dust bunnies and
> observing all fans (overheating will cause system freezing). Obviously
> you can't do this with a laptop, but you can hear if the fan is running
> and feel if the laptop is getting too hot.
>
> 2) Test the RAM - I like Memtest86+ from www.memtest.org. Obviously, you
> have to get the program from a working machine. You will either
> download the precompiled Windows binary to make a bootable floppy or
> the .iso to make a bootable cd. If you want to use the latter, you'll
> need to have third-party burning software on the machine where you
> download the file - XP's built-in burning capability won't do the job.
> In either case, boot with the media you made. The test will run
> immediately. Let the test run for an hour or two - unless errors are
> seen immediately. If you get any errors, replace the RAM.
>
> 3) Test the hard drive with a diagnostic utility from the mftr. Download
> the file and make a bootable floppy or cd with it. Boot with the media
> and do a thorough test. If the drive has physical errors, replace it.
>
> 4) The power supply may be going bad or be inadequate for the devices
> you have in the system. The adequacy issue doesn't really apply to a
> laptop, although of course the power supply can be faulty.
>
> 5) Test the motherboard with something like TuffTest from
> www.tufftest.com. Sometimes this is useful, and sometimes it isn't.
>
> Testing hardware failures often involves swapping out suspected parts
> with known-good parts. If you can't do the testing yourself and/or are
> uncomfortable opening your computer, take the machine to a professional
> computer repair shop (not your local equivalent of BigStoreUSA).
>
> Malke
> --
> Elephant Boy Computers
> www.elephantboycomputers.com
> "Don't Panic!"
> MS-MVP Windows - Shell/User
>
