iphonogasm

Hi, im trying to configure anonymous FTP access in IIS7. I have a FTP server offering support files for download to ANYONE. I need to configure my FTP server to allow anonymous access to a specific directory. I have created a directory C:/FTP/public/ and in IIS managment console have added anonymous authentication and added anonymous users only. Basic authentication is disabled. The default username for IIS anonymous access appears to be IUSR with no password, when i pass ftp://anonymous@ftp.domain.com i get prompted for a username and password. How can i just login anonymously with NO password and pass this directly from a link such as ftp://anonymous@ftp.server.com">

Hi, I am routing between NICs, WAN and LAN My question is, how can I use windows server 2008 firewall as my main firewall. So, if i want to block outbound web traffic, i will just open the server which is my gateway, and add a outbound block rule for port 80 etc. Right now it seems windows firewall is only a firewall for that specific server and not the traffic passing between the two nics! Any ideas? Thanks!

Hey everyone, i know this is a little off topic but i know most here know heaps! Hope you dont mind me posting this here and hope you can help! i have a problem and have spent all night trying to solve this issue! http://temp.accesscontrolsystems.co.nz I have a form in the index page for "Request a Quote" this is a clone of the contact form. I then also have a contact form in the footer on he site. Both seem to send mail fine, however - The quote form displays the success message fine, but its the wrong message. It displays that all fields are required however they are all there and the message is sent. - The footer contact form on the other hand does the opposite almost. The message displays the correct message however on a new page which is incorrect. This should be working as the contact form does on the CONTACT page which is currently the only page working on the site. Can someone PLEASE helo me, Ive played around all night with the divs repositioning the Any help much appreciated! Thanks Guys!

do you think you could spare me 10 mins to walk me though some router config. I have enabled DHCP and tested all is good. I have added a route for 10.0.2.0 255.255.255.0 but still i am unable to ping anything on the local network (ever the router from the router (loopback)) and im still getting no DNS cannot ping 8.8.8.8 of course as i cannot ping anything on the LAN Once i fix the DNS issue, i can use this router as default gateway and DHCP server I swear this router seems a bit dodgy, the guys is positive there is no issues with the router, and i dont know an awful lot... Thanks!

ok thanks

yea ok now i just tried to telnet again, with no reboot since last reboot and i get no password set. I am setting same password and login on line vty 0 and line vty 1 could this be the problem Im guessing so lol

Ok..so went away for the weekend... just got home and tried it again. and its working. Why this is i am really not sure...al i cam think is i was copying the start up config to the running, but this is really not like me, but having said that, maybe i just need a weekend away HAHA!! Now, my next little issue which ive had a small issue with prior to this one is. I have no DNS when use my 1841 as a router, i cannot even ping interlally from the router itself. I try ping 10.0.2.x and 8.8.8.8 with a 0% success rate sh ip route displays a default route for network 10.0.2.0 Any ideas? Cheers

Ok thanks, i thought i may have been copy flash as it has a flash card plugged into it, almost like a MD card side Config before reboot, Line vty configured wr mem and copy run start. router1#sh run Building configuration... Current configuration : 713 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router1 ! boot-start-marker boot-end-marker ! enable secret 5 $1$14wM$PO8QuSMlKJ/hNgztF8vw/1 ! no aaa new-model ip cef ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 ip address 10.0.2.250 255.255.255.0 duplex auto speed auto ! ip forward-protocol nd ! ! no ip http server ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 1 password cisco login line vty 2 4 login ! scheduler allocate 20000 1000 end Config after reboot. System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsupport Copyright 2006 by cisco Systems, Inc. PLD version 0x10 GIO ASIC version 0x127 c1841 platform with 131072 Kbytes of main memory Main memory is configured to 64 bit mode with parity disabled Readonly ROMMON initialized program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0xcb80 program load complete, entry point: 0x8000f000, size: 0x15d4270 Self decompressing the image : ###################################################################################################################### [OK] Smart Init is enabled smart init is sizing iomem ID MEMORY_REQ TYPE 0X003AA110 public buffer pools 0X00211000 public particle pools 0X000021B8 Onboard USB If any of the above Memory Requirements are "UNKNOWN", you may be using an unsupported configuration or there is a software problem and system operation may be compromised. Allocating additional 6691343 bytes to IO Memory. PMem allocated: 118489088 bytes IOMem allocated: 15728640 bytes Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(15)T8, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright 1986-2008 by Cisco Systems, Inc. Compiled Mon 01-Dec-08 13:54 by prod_rel_team Image text-base: 0x6008195C, data-base: 0x61901C00 Cisco 1841 (revision 7.0) with 115712K/15360K bytes of memory. Processor board ID FHK133073EU 2 FastEthernet interfaces DRAM configuration is 64 bits wide with parity disabled. 191K bytes of NVRAM. 62720K bytes of ATA CompactFlash (Read/Write) Press RETURN to get started! router1#sh run Building configuration... Current configuration : 713 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname router1 ! boot-start-marker boot-end-marker ! enable secret 5 $1$14wM$PO8QuSMlKJ/hNgztF8vw/1 ! no aaa new-model ip cef ! ! ! ! no ip domain lookup multilink bundle-name authenticated ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 no ip address shutdown duplex auto speed auto ! interface FastEthernet0/1 ip address 10.0.2.250 255.255.255.0 duplex auto speed auto ! ip forward-protocol nd ! ! no ip http server ! ! ! control-plane ! ! line con 0 line aux 0 line vty 0 1 password cisco login line vty 2 4 login ! scheduler allocate 20000 1000 end Thanks!

Ok so i will put some cisco questions here... im getting quite into cisco so i think i will post a bit here... My first issue, a bit of a biggie, and annoying is TELNET (i know its not the most secure) but im trying to configure telnet on my 1841. And i can get it working....but I configure every en conf t no ip domain-lookup int fa0/1 ip address 10.0.2.250 255.255.255.0 no shutdown hostname ROUTER1 line vty 0 password cisco login line vty 1 password cisco login wr mem copy run start copy run flash why when i reboot the router all configuration is the same EXCEPT i cannot telnet into the router anymore....however with this configuration before reboot..i can telnet into it THANKS!!

Hi, how does this example of my VLAN layout work.. I have a router with 4 ports, does NOT support VLANs but i will just remove the routes between the ports. This way i can setup QoS directly after the entry point of my internet.....? what you think? Cheers!! NOT ACTUAL GEAR USED! [ATTACH]204.IPB[/ATTACH]

Wow thanks !! I think thats exactly what im after!

Sorry snapshots

Well hyper-v as....i didnt see any advantage to using vmware or any other , hyper-v takes screenshots etc... ?

Nah the 684a is just the previous wifi networks joined. It creates a new SSID each time you connect..... Deleted all in manage wireless networks... Im working with cleaning stuff up and prioritzing traffic, using QoS and VLANs However, how do i create VLANs for specific services etc when im virtulizing many different things on a single machine with 2 NICs?? Im struggling with NETWORK LAYOUT :)

Hi, i have a new network layout and would love some input as for the design and also have a few small questions.... I have a ACER VTX server with 2 NIC,s setup with NIC teaming for redundancy and redundant power supplys. This is virtulizing the following. My Setup + / SERVER - / Sever WITHIN server (virtulization) = / OPTIONS/SETTINGS wintin SERVER being virtulized + VTX Machine (Acer) [ 10.0.2.20 ] - DHCP/DNS/RRAS/File/Print server [ 10.0.2.24 ] = Scope ( 10.0.2.1 - 10.0.2.254 ) = Exclusions ( 10.0.2.1 - 10.0.2.50 ) = DNS Servers ( 10.0.2.24 ) = Router ( 10.0.2.24 ) - Mail Server [ 10.0.2.25 ] - Web Server [ 10.0.2.26 ] - SIP Server [ 10.0.2.27 ] + Domain Controller / VPN Server (RRAS) [ 10.0.2.22 ] + Test Server ( Maybe Linux ) [ Unknow ] + WAN Router [ 10.0.2.1 ] + WiFi Access Point [ 10.0.2.2 ] Still to setup a VLAN for all VoIP traffic etc. My Problems 1.) My DNS server and Domain Controller are different. I want my DNS server to be able to forward requests for joining my domain to my DOMAIN CONTROLLER instead of having to use my domain controller as my DNS server. From what i can see online (technet etc) i have to use the DC as the DNS server. 2.) With the setup above.. when a client join the network and is given DHCP via 10.0.2.24, i have my network name with INTERNET ACCESS and Unidentified Network with INTERNET ACCESS. See below pic. [ATTACH]203.IPB[/ATTACH] 3.) My Iphone.....When i am on wifi and i try to share files via an app via wifi, it appears the wifi drops out. If i ping my iphone 10.0.2.x and i get a reply...then i open an app and do a wifi share via web port 8080 i am unable to access it and then i get a timeout on ping, no response whatsoever UNTIL i RENEW my lease???? WEIRD.. Any ideas on anything above is much appreciated!