Microsoft Support & Discussions

Had a corrupted profile, so made a new user id (different name) and followed microsofts instructions to transfer emails and addresses to new profile. Made sure it showed local rather than "temp" user. After transferring everything deleted old profile. When the system rebooted all information was not saved and the profile shows as if it were a newly created one. How can I make sure all my information ...emails, favourites etc are saved when the system reboots and all information doesn't disappear. Thanks for the help...

My sons PC has started showing this error whenever he tries to install a game. The CD runs for so long and then comes up with this error. I have changed the HD, memory, CD Drive, cables and still the problem persists. The games install on other machines ok. Could it be a problem with the motherboard? (the only thin I haven't changed) It is an Asus A7N8X-E

I am having trouble learning about certain aspects of pc math like "Hexadecimals, Binary numbers" e.t.c, can anyone recommend any math course/tutorial which covers this that's simple and easy to understand please? Thanks.

I installed XP Home on my laptop and duly activated it within a couple of days after checking that all the drivers etc were working ok. The past few days I have started receiving the warning notice that XP needs to be activated. The first day, I ignored this, but the past few days with the countdown continuing I decided it would be best to reactivate. I select the activate now option, and am taken to a page where I get the message "this software is already activated". I then tried a manual activation and again got the same message. The question is, in four days time is my software going to cease working, what can I do.

I have this problem where I was not able to send or receive using Microsoft Fax (for WinXP and 2000). I'm using a GPRS modem which I have got working for other fax softwares like Symantec and MightyFax. I was able to establish a connection but was not able to send or receive. I can hear the ringing sound from the remote fax machine I was dialing but no fax was received there. Error message is "An error occurred while sending/receiving fax". For Win2000, I was only able to send but even then, the fax was not clear. Help appreciated. Thanks.

I recently had a virus and spam problems with my computer. Brought it in to get removed and when I brought it home, my wireless keyboard worked but not my wireless mouse. I have tried removing the hardware and then reinstalling it but still it doesn't work. I have checked the battery charge and that is fine. Thanks. Jodi

I have no sound from my PC, when I go to control panel sound and run test it says ' windows cannot execute dpvsetup.exe, use add remove control panel to to install. devises says 'multimedia audi controller' has ! in yellow. then it says The drivers for this device are not installed. (Code 28). Tried to install some drivers but can't can anybody help me. Stephen.kempson@ntlworld.com

Good Morning! Everytime I start my computer I get a run time error its on c:\windows\explorer.exe tells me the aplication has requested the runtime to terminate it in an unusual way. Asks me to contact the aplication support team for more info. Any suggestions? Thanks in advance!!! Sira

Help, just installed a new harddrive on my dell after my old drive crashed, I installed XP, everything was working great until the ati radeon 7500 all-in-wonder was installed, now my towers light never comes out of the amber color to green and it simply won't boot, nadda. What should I try at this point beings it isn't allowing my to do anything, the system stays in standby yet my cd rom drive trays works, seems weird.................. any help would be greatly appreciated :) Thanx

When i copied folders from one harddisk to another harddisk, oulook express not showing all folder but folders are there. how can we are able to show all folders thanks

Hello Everyone, I have an old P166 Gataway that I left in the basement for about 10 month after I bought a new PC. Last week, I hooked up it again hoping to find an old file I had. It did not start and asked for the start up disk. When I start it with the Win 98 start up disk, I got a error message saying that the hard drive is not partitioned (no FAT32). I was able to run SCANDISK.exe for drive C from the MS-DOs prompt and it said no errow was detected. Could any one help me as what to do next so I could recover some of the files I had in the old machine? Thanks

im really curious to see what you guys think, maybe you could settle a big argument in my household. With an internet cable modem connection that is a shared bandwith, how much does this shared bandwith affect internet gaming such as online poker? does opening a browser for normal internet activities(not downloading huge files) while playing online increase your chances of having your game bogged down? With a shared bandwith is it safe to say that in order for my connection to slow down to the point where gaming connections are affected everyone in my neighborhood would have to be online downloading huge files? any opinions are appreciated thanks!

Downloaded SpyBot....started having immediate problems, constant error messages. Have now deleted SpyBot, downloaded Spy Sweeper instead. IExplore message still occurring: "this program has performed an illegal operation and will be shut down. If problem persists, contact the program vendor." Details: IExplore caused an invalid page fault in module kernel32.dll @ 1097: bff87f00. Can anyone help me? I would greatly appreciate it. I have Windows 98. This is my first time on this site.

I have added the server to the domain, added as a member server but everytime I authorize it it says to wait a few moments for the authorization. Under the DHCP panel it shows the server as being "not authorized" but when I go to the Action menu to authorize it the authorize option says unauthorize? Can anyone help me?

Hello everyone, I am trying to figure out why my system keeps rebooting on its own and powers back up with this message: "SATA Primary hard disk drive 0 failure" Strike F1 key to continue, F2 to run setup utility. I ran a HD test from the BIOs splash screen and it passed along with a succesful defrag. I have ran both my Norton and AVG virus programs along with my spy programs too. I am using a Dell XPS Gen 2 with the following config: Intel Pentium 4 3.2Ghz (800FSB) 1MB cache CPU Kingston Hyper X 512MB Dual channel DDR 433Mhz mem MSI Nvidia Geforce FX 5600 256MB DDR AGP 8X video Seagate 160GB 7200RPM 8MB buffer SATA Hard drive w/ Native Command Queuing…

A crashed hard dirve cased me to have to restore from an image after maxing several passes at wich check disk this was sucessfull for the most part. Now the system has no items listed in the sound events eveen though some sound events are working. the system is a windows 2000 profesional system How do I restore the sound events.

Hi! Im a computer rookie, Ive P IV 2.6 GHz 512 DDR, Interl 875 motherboard with integrated NIC and video running on winxp SP 2. iv two problems 1. Im unable to install any PCI device in my computer. Ive just added a PCI Sound card to test, it detects the card loads the driver (crystal soundfusion) but it is not showing speaker icon. In control panel, sounds and devices it says no audio device, i tried to install it on a different pci slot but no. Last time i tried to install a firewire card which was working fine on my other comp but refuses to install on this computer. 2. In my network sudden;y one day all computers running in win98 (intel 810, 128 ms ram, surec…

I have a Eval. copy of SBS 2003 Primium edition in it shuts down on it's own I did found a log in the events that named a problem that was doing it but the log doesn't define the reason for the for shuting down? :confused: :D

Hello, I just purchased a "game port" Microsoft steering wheel used for cheap. Problem is my computer does not have a game port to accept this type of plug. My machine is brand new 02-2005 and is loaded with USB's. Additionally my machine runs XP. Is there any way to make this wheel work with my computer? Please Help Thanks :(

i am running windows 98 on my computer. everytime i try to start the comp it automatically goes to safemode...i have gone to the startup menu where u can select safemode ,normal mode etc. but even when i select normal mode it will load in safemode. how do i get out of it??? thanks for any help.

Hi, I have a problem with my Mandrake 10.1 box. Since earlier today, I haven't been able to get it running- it would go through the boot cycle, and then turn itself off about 1 minute later, leaving me with about 20 seconds where I could actually tunnel in with SSH. The box has no monitor attached to it, and therefore SSH is the only solution to me seeing what's going on. Since it only spares me with those precious 20 seconds, I can't really see much at all. Would any of you guys have any idea as to what is going on? Absolutely any ideas are welcomed. Thanks

Aside from GPO in AD, how can I automately deploy the IE Proxy & Exception settings of my domain users on their respective PCs? Please help.

I have problem with a C# Win Forms app that uses the ErrorProvider class to provide input validation feedback to the user. On my development workstation (WinXP Pro + Visual Studio .NET 2003), when I run the app by itself or from VS, everything works fine... the ErrorProvider tooltips display correctly, etc. However, on other systems (e.g., Win 2003 Server, or even another PC running XP Pro), after the app enters validation mode, the error tooltips don't display at all when the pointer is hovered on the error icon. Furthermore, if the error icon is located close to the lower or rightmost edge of the form, it looks like the tooltip is actually being displayed behind the for…

if anybody can help please? i am running nero ver 6.3.1.26 and in cd 4.3.11.1 on desk top and laptop, both with windows xp ser pack 2. my external writer Freecom on the lap top formats CD -RW as INCDFS format and sucessfully enables me to drag and drop files onto the cd-rw and erase files. My desktop internal LG 16X Double layer DVD/Cd RW, however formats the same make of cd-rw as UDFRDR which does not allow me to drag and drop, erase etc as it gives the message the disk is write protected. Is there a way i can format my disks on the desk top to recognise the incdfs format. i was hoping with using the same software on both machines i could swap the same disk between the …

I've been trying to burn some data to DVDs using a DVD writer I'm borrowing from my roomate, and am experiencing some problems. The first disc burned fine, but subsequent discs have failed early in the burn with 'power calibration failure' errors. I've tried several discs (all from the same spindle, though), as well as restarting the burning app (Nero 5), restarting the machine, and reseating all of the drive connectors. Any thoughts as to what might cause an error like that?