Microsoft Support & Discussions

I have a client with a Proliant ML 330, Raid 1 two drives only and no possibility of more than 2 drives period. They are out of disk space or will be shortly. I have removed as much as possible. Currently, they have two drives each is 34.6 Gigs. I have ordered two 147 Gig drives. I have been told by an HP tech that I can do the followings. 1. take down the server and break the mirror by removing one drive. 2. change the jumper on the new drive to match the setting on the old dirve I removed. 3. install the new 147 Gig drive and bring the server back up. 4. let the server rebuild. 5. Check the Array Controller Utility to see that the process is complete a…

I have a client with a Proliant ML 330, Raid 1 two drives only and no possibility of more than 2 drives period. They are out of disk space or will be shortly. I have removed as much as possible. Currently, they have two drives each is 34.6 Gigs. I have ordered two 147 Gig drives. I have been told by an HP tech that I can do the followings. 1. take down the server and break the mirror by removing one drive. 2. change the jumper on the new drive to match the setting on the old dirve I removed. 3. install the new 147 Gig drive and bring the server back up. 4. let the server rebuild. 5. Check the Array Controller Utility…

I somehow manged to mangle my config such that I lost connection to the internet. I was unable to restore the connection and eventually ran out of ideas and opted to reinstall windows (not a lot of fun!). I ran a diagnostic which gave the following error message: 'NetBT transports test. . . . . . . : Failed List of NetBt transports currently configured: [FATAL] No NetBt transports are configured.' For future reference, can anyone advise what that message means (in a little detail) and what steps are required to correct it. I have an uneasy feeling there is a straightforward way of fixing it rather than the nuclear option I took. tks Marc

"FAULT ->7c918fea ff4010 inc dword ptr [eax+0x10] ds:0023:00000010=????????" As shown above, from Dr Watson log, this error casuses an error pop up window at each boot up, and is the same for each occurance. It is involved with Svchost.exe PID 820, is there other log info that would be useful in order to advise me on the solution? Any relevant advise regarding the possible solutions for the errror are requested and apprieciated! TIA

I had problem with updating my vista on both labtap and desktop. When it's become to security tools, i had onecare and windows defender installed on both vista business and home p. versions on my computers. But now, the problem is solved and my both windows are able to download and install the updates. I simply uninstalled onecare and, temporary turned windows firewall and bitdefender off. restart my computer and ran the update. working now :-D

go 2 this page. thttp://www.mgtek.com/dopisp/ to download plugins & your Ipod will appear in windows media player 2 sync your music...

go 2 this page. thttp://www.mgtek.com/dopisp/ to download plugins & your Ipod will appear in windows media player 2 sync your music...

Hi..any expert..i need to check with all the experts...I using a DIY set, recently i change a hard disk..and do a full format..now i have installed the window XP with service pack 2...but after i install....i found out that when i logging in the window...there is not startup sound and when shut down also no sound... even i play the pinball also no sound at all...i have checked my speaker and everything seem ok but still no sound appear..and not mute....only can listen the songs from window media player.... First..i checked from device manager and found out there is an erros on the MPU-401 Compatible MIDI Device "This device cannot find enough free resources that i…

With the Mini-ITX form factor I wonder if there are already hard/ software packages out there that can controll 24 seperate LED channels with each being controlled at 2 or 3 levels ast a rate up to 15 pulses per second. Thanks

With the Mini-ITX form factor I wonder if there are already hard/ software packages out there that can controll 24 seperate LED channels with each being controlled at 2 or 3 levels ast a rate up to 15 pulses per second. Thanks

I have a client with three machines. Each machine is operating under Windows XP Home Edition. Each machine has all updates installed and would appear to be identical. However one machine has a strange reaction when attempting to create a new folder on the root directory of the C: drive. The folder is created okay with the default name of "New Folder". When an attempt is made to rename the folder an error message appears with the title of "Error Renaming File of Folder". The critical error icon appears on the message box. The text within the message box is: "Cannot rename New Folder: It is being used by another person of program." "Close any programs …

I have a client with three machines. Each machine is operating under Windows XP Home Edition. Each machine has all updates installed and would appear to be identical. However one machine has a strange reaction when attempting to create a new folder on the root directory of the C: drive. The folder is created okay with the default name of "New Folder". When an attempt is made to rename the folder an error message appears with the title of "Error Renaming File of Folder". The critical error icon appears on the message box. The text within the message box is: "Cannot rename New Folder: It is being used by another person of program." "Close any pro…

Every time auto back up runs it knocks me off of the network. I have to unplug my usb hard drive and reboot. Happens both on a notebook running vista p and a desktop running vist u. The hard drive backup is a Western Digital my book. Any one got any ideas?

Hello folks, Having a problem with subject application. For the most part it simply does not work. On rare occasions it seems to kick in for a time then a re-start later and it is off. There may be some connection between this problem and Adobe Photoshop CS2 but this is unclear. There was an update in 2007 from the original Vista version of Media Player therefore I can not use the setup program to repair or reinstall. Does anyone know which upgrade this was so that possibly removing it will allow for reinstallation of Media Player 11 which is what event viewer recommends for this error. Any help on removing the update or otherwise solving this …

I use to think a disk is a disk is a disk. I performed a ASR before on XP SP2 before with no problems but with the same vender disk .. i.e. the same model # and close SN# .... but now I'm trying to restore from a WD SATA 160 to a Seagate SATA 160 and get the following from restore Capacity of the replacement hard disk is insufficient, cannot be used to recover ..... On paper and XP see then as the same size ... actually the Seagate was 100k larger ... BIOS sees it as a 160 SATA disk it's partition and formated ... and before you say anything I tried it unpartitioned ... unformatted and the same thing ... Do you really need the exact disk for a ASR ??? if …

I use to think a disk is a disk is a disk. I performed a ASR before on XP SP2 before with no problems but with the same vender disk .. i.e. the same model # and close SN# .... but now I'm trying to restore from a WD SATA 160 to a Seagate SATA 160 and get the following from restore Capacity of the replacement hard disk is insufficient, cannot be used to recover ..... On paper and XP see then as the same size ... actually the Seagate was 100k larger ... BIOS sees it as a 160 SATA disk it's partition and formated ... and before you say anything I tried it unpartitioned ... unformatted and the same thing ... Do you really need the exact disk for a ASR …

Where and how did you find the installation for Frontpage Server extensions? The Win 2003 64 bit system makes it a mystery. I've read all the Help and understand nothing. The old 32 bit system it was easy. richard

This is for anyone who's having trouble with WU (BITS/AU): http://castlecops.com/t106642-How_To_Fix_Windows_Update_BITS_Newly_Edited..html -or- http://www.castlecops.com/postlite106642-.html [i wrote it -- I would have posted the entire set of instructions here, but I wasn't sure if I could upload the Zip file with the Registry fixes on this N.G., so anyone could subsequently download it. However, the necessary File ready for downloading, along with the lengthy instructions, are all located at the above link.] If the above link doesn't work, go to: http://castlecops.com/ Click "Forums" right below the Castlecops logo, then go to the "General Computer Proble…

S O L U T I O N : 'Fix Vista Unable to Rename or Move Files and Folders Issues After Applying KB938979 Patch » My Digital Life' (http://www.mydigitallife.info/2007/08/18/fix-vista-unable-to-rename-or-move-files-and-folders-issues-after-applying-kb938979-patch/) BYE! (for Thanks please visit 'MTB Vulture Rionero ₪ βy MagoNicola Liberomail Libero Mail' (http://mtbvulture.net) and also my banners.. :D ) -- magonicola

I have a driver being installed for an AC79 onboard, laptop chipset. I view the details and get the name of the file... ac97intel.sys (intel chipset). I'm shown the location being in system32\drivers. Yet I can't find the file. Why? I have a Analog devices chipset for AC97 audio(AD1881) and am trying to get full use of that codec. But it's next to impossible with Vista always reinstalling its most favorite driver. I have had success with the Soundmax driver so I know it works. But installation is not a sure thing for whatever reason. So I would like to isolate the Vista choice and feed Device Manager my choice... which I know works. Thanks for any…

Virus scanning recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP http://support.microsoft.com/kb/822158 > Do not scan the following files and folders. These files are not at risk of infection. > If you scan these files, serious performance problems may occur because of file locking. > Where a specific set of files is identified by name, exclude only those files instead of > the whole folder. Sometimes, the whole folder must be excluded. Do not exclude any one of > these based on the file name extension. > • Microsoft Windows Update or Automatic Update related files > • The Windows Update or Au…

Virus scanning recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP http://support.microsoft.com/kb/822158 > Do not scan the following files and folders. These files are not at risk of infection. > If you scan these files, serious performance problems may occur because of file locking. > Where a specific set of files is identified by name, exclude only those files instead of > the whole folder. Sometimes, the whole folder must be excluded. Do not exclude any one of > these based on the file name extension. > • Microsoft Windows Update or Automatic Update related files > • The Windows Update or Au…

Virus scanning recommendations for computers that are running Windows Server 2003, Windows 2000, or Windows XP http://support.microsoft.com/kb/822158 > Do not scan the following files and folders. These files are not at risk of infection. > If you scan these files, serious performance problems may occur because of file locking. > Where a specific set of files is identified by name, exclude only those files instead of > the whole folder. Sometimes, the whole folder must be excluded. Do not exclude any one of > these based on the file name extension. > • Microsoft Windows Update or Automatic Update related files > • The Windows Update …

test

test