Microsoft Support & Discussions

I notice that one item has a tick but no other information.... Hmmmmmm! Does anything look wrong here:- Logfile of HijackThis v1.99.1 Scan saved at 21:45:37, on 21/09/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v7.00 (7.00.6000.16512) Running processes: C:\WINDOWS\System32\smss.exe C:\WINDOWS\system32\winlogon.exe C:\WINDOWS\system32\services.exe C:\WINDOWS\system32\lsass.exe C:\WINDOWS\system32\Ati2evxx.exe C:\WINDOWS\system32\svchost.exe C:\WINDOWS\System32\svchost.exe C:\WINDOWS\system32\spoolsv.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.e…

I notice that one item has a tick but no other information.... Hmmmmmm! Does anything look wrong here:- Logfile of HijackThis v1.99.1 Scan saved at 21:45:37, on 21/09/2007 Platform: Windows XP SP2 (WinNT 5.01.2600) MSIE: Internet Explorer v7.00 (7.00.6000.16512) Running processes: C:\WINDOWS\System32\smss.exe C:\WINDOWS\system32\winlogon.exe C:\WINDOWS\system32\services.exe C:\WINDOWS\system32\lsass.exe C:\WINDOWS\system32\Ati2evxx.exe C:\WINDOWS\system32\svchost.exe C:\WINDOWS\System32\svchost.exe C:\WINDOWS\system32\spoolsv.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgamsvr.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgupsvc.exe C:\PROGRA~1\Grisoft\AVGFRE~1\avgemc.e…

>I can't tell you what caused the problem, but let me point out that >using Ctrl+Wheel Scroll to change the size is a Windows standard and >works in *most* applications Hi I still having problems in some applications it looks normal, first reboot, later changed its size, in other application the fonts are still bigger than normal, In other applications the fonts are smaller than normalI I think I can fix this (not sure) entering to the windows registry (regedit) but I do not know what to change in order to fix it There is no virus, I checked my computer with Lavasoft, Zone Alarm Pro and BitDefender I did not install or uninstall another appli…

>I can't tell you what caused the problem, but let me point out that >using Ctrl+Wheel Scroll to change the size is a Windows standard and >works in *most* applications Hi I still having problems in some applications it looks normal, first reboot, later changed its size, in other application the fonts are still bigger than normal, In other applications the fonts are smaller than normalI I think I can fix this (not sure) entering to the windows registry (regedit) but I do not know what to change in order to fix it There is no virus, I checked my computer with Lavasoft, Zone Alarm Pro and BitDefender I did not install or uninstall another appli…

Is there a way to find out if there are any 16-bit drivers on your computer? All of my programs are two years old or less. The only exception is Works 2002. Thanks; David

I was wondering if anybody knew of a utility to set share and folder permissions via a web browser or utility. What im looking for is somthing simple and similer to the one used in windows home server. I need it for a windows 2000 server box so thier local admin can set things up with out alot of knowledge. If anybody knows of any program I would appericate it.

Is there a way to delete the audit program? It may be that, that makes standby iimpossible. There's only one file, in c\win\system32. msaudte.dll. Don't know what that is used by, or uses. -- R T address anti-spammed

Is there a way to delete the audit program? It may be that, that makes standby iimpossible. There's only one file, in c\win\system32. msaudte.dll. Don't know what that is used by, or uses. -- R T address anti-spammed

I have an HP Officejet 7310 on Vista Business. After installing the latest software from HP everything works fine. After a few days, the printer disappears both from the printers list and from Imaging devices in the devices section and so, it cannot be managed any longer by its software utilities. I believe that this gets worse if I suspend/resume my laptop instead of shutdown.

Hi all hoping someone can help, the problem I've got is when switching from one user to another the new on won't load properly, it goes as far as loading the desktop but freezes when loading the task bar. Was working okay till recently , if I remove my daughters user will the files be saved anywhere ? so that I can get them back if I create her user again, also is it worth having multiple users ? got 4 kids all wanting their own accounts but will this slow the computer down ? not worried about the security side as I have programs to monitor them...sorry its long winded but thanx for any help.........

Hi all hoping someone can help, the problem I've got is when switching from one user to another the new on won't load properly, it goes as far as loading the desktop but freezes when loading the task bar. Was working okay till recently , if I remove my daughters user will the files be saved anywhere ? so that I can get them back if I create her user again, also is it worth having multiple users ? got 4 kids all wanting their own accounts but will this slow the computer down ? not worried about the security side as I have programs to monitor them...sorry its long winded but thanx for any help.........

Hello I have only initialized the TPM from Windows since I like to backup the TPM owner information to Active Directory. However 1) Is it possible to initialize the TPM from the computers BIOS? 2) Is it possible to backup the TPM owner information to Active Directory after the TPM has been initialized? Thanks! /Ragnar

My down loads are still not activated. Please advise how to do so.

Wesley, I was directed to search this newsgroup for IP/RPC search by Steve Winograd from the Networking newsgroup. What I found here from you was the exact fix I needed for my issue of the ipconfig/renew error message I was getting: RPC server unavailable. I t5hink it was this hint that worked; Do the same for DHCP Client. This was the only one of the three jhints you highlighted here that was set to manual. After setting it to auto and starting it that the cable modem started up. Thank you so very much for your help. Bob "Wesley Vogel" wrote: > Try this. > > Open Services... > Start | Run | Type: services.msc | Click OK | > Scroll do…

Wesley, I was directed to search this newsgroup for IP/RPC search by Steve Winograd from the Networking newsgroup. What I found here from you was the exact fix I needed for my issue of the ipconfig/renew error message I was getting: RPC server unavailable. I t5hink it was this hint that worked Do the same for DHCP Client. This was the only one of the three jhints you highlighted here that was set to manual. After setting it to auto and starting it that the cable modem started up. Thank you so very much for your help. Bob "Wesley Vogel" wrote: > Try this. > > Open Services... > Start | Run | Type: services.msc | Click OK | > Scr…

I've been trying to download software and when I run the downloaded software, this is the error message i get. When i went to MS website, it told me to download and run the Widow Installer Cleanup Utility 29031. I downloaded it and ran it, only to have the same error message come up again. Any suggestions? Thanks

Two famous celebrities having fun in 'french TV' (http://tinyurl.com/2hjzy5) -- TerthTerty ------------------------------------------------------------------------ TerthTerty's Profile: http://www.cforum.net/forums/member.php?userid=1974 View this thread: http://www.cforum.net/forums/showthread.php?t=186405

I had this problem, and I tried the "remove this KB and that KB" approach with no luck. So I downloaded the full "Update Rollup 2" installer (http://www.microsoft.com/downloads/details.aspx?FamilyID=e5daf37e-e243-4410-bc51-81cf2b56fe6e) and gave that a go. It failed, too. BUT... I was then able to go through the "MCSetup.log" file it created, and I discovered that it was actually the KB895572 package which was spitting out the 0x643 error code. And when I looked at the "KB895572.log", I found the reason - which makes absolutely no sense, of course: KB895572 is an update for Window Media Player 10, and if you attempt to install it silently onto a syste…

Is there an event that is logged to identify a switch to battery power? I have enabled "kernal-power" but can't find a specific event that identifies this. I would like to shut down a NAS by using this event to trigger a scheduled task. the software that comes w/ my UPS doesn't have this capability. Any help is appreciated - thank you

I cannot find a reference to this anywhere, but hopefully someone else has a clue as to where to start looking. Standalone CA running on 2k3 Ent. Clicking on "install this CA certificate chain" as a local admin of the box works just fine (you get the "this site may not be trusted" but that is all). If you are anything lower than a local admin, you get an Error! popup box with no details at all in it, just a yes or no button. Clicking yes installs the cert just as it should, no doesn't. Nothing in the event logs anywhere. Anyone else seen this and know what is happening, or can point me in the direction to start looking? thanks, erik

I've been trying to get rid of the 9.41 drivers as the mouse is acting weird and it looks like a driver problem - the only REAL problem is once I uninstall and reboot, the mouse and keyboard are gone. I can put a USB (the K/B and mouse are PS/2) on it and at least get THAT working, but there is - suddenly - a conflict (exclamation point) on the keyboard is an error 9 registry corrupted. The ONLY thing that repairs it - is an image replacement - am trying just a registry files restore now. Any ideas would be GREATLY welcome.

I have been using a new Vista business 64-bit desktop for a month or so. I use Remote Desktop all the time, mostly to Windows XP x32, 2003 Server x32, and 2000 Server x32 machines without a hitch. However, we just installed a new server with Windows 2003 Enterprise x64 (these are all on the same domain, in the same rack, by the way) ... when I remote desktop to that server from the Vista 64 desktop, remote desktop performance is abysmal -- so SLOW it is unusable. I couldn't find anything on the MS site regarding this issue, but the following link: http://www.vistax64.com/vista-networking-sharing/79317-fixed-remote-desktop-connection-rdc-slow-no-connecti…

Hello, how to deactivate Microsoft Sync Center at start up ??? Please tell me how to dissable Microsoft Sync Center if the Sync Center isn´t working any more !!!!!!!!!!!!! Sync Center fails during bootup and the windows problem- and summaryassistent shows "Microsoft Sync Center doesn´t work any more.... Further information about the problem are collected.... This will take a while...." Would you like to send further information about the problem? Further Details about the problem can helf Microsoft by building a solution. Please tell me how to fix this problem or how to disable Micorsoft Sync Center in Microsoft Windows Vista Premium !!!!!! THANK Y…

I have 2500 printers (HP) that I need to change the location of them and change the comment field as well. Can some one tell me where the best place is for doing this change via a script. Can it be done in WMI on the print server or does it have to be in AD or both? Thank you in advance

HELP!! I have xp and I switched computers awhile back, I transfered my pictures and thought everything was fine then yesterday I was playing on a casino site and everything was fine. I then transfered new pictures from my camera, I then went in to edit them and noticed that I couldn't so I downloaded a few different photo editors to try didn't like them so I uninstalled them. Later in the day I went back to the casino and I was able to log on and play at the reg. slot machines but when I went to a free slot tournament it froze and then to day when I try to go to the casino I get this error message Image Missing: Image Name = sg.mask File Name = ../games\s…